125965

Smeg ls 19 1 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
User instructions
35
To re-enable the acoustic device repeat the following procedure:
• press down the
HALF LOAD (6)
button for a few seconds until the
bN
symbol appears on the
INFORMATION DISPLAY (8)
;
• press the
HALF LOAD (6)
button again to enable to acoustic device (the symbol
bS
appears);
• press the
START/STOP (5)
button twice to exit the set-up mode.
3.3 Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION DISPLAY
, described in
chapter "3. Description of the controls", from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has been added to the
dispenser
.
•
The baskets have been
correctly loaded.
•
The spray arms are able to
rotate freely
and without obstruction.
•
The dishwasher door is
securely closed
.
HALF-LOAD FUNCTION
This function is recommended for loads of up to
6 place-settings
, and cuts down on the use of
water and electricity. It can be selected using the
HALF LOAD (6)
button and there are three
different options:
1) pressing the button just once selects the upper basket;
2) pressing the button a second time selects the lower basket;
3) pressing the button a third time reverts to the full load function.
After having selected the desired washing program in the usual manner, choose one of the above
three loading options: on the
INFORMATION DISPLAY (8)
, the indicator light corresponding to the
selected basket will illuminate for 5 seconds, after which the
INFORMATION DISPLAY (8)
will
revert to showing the selected program. In order to check again the currently selected basket,
simply press the
HALF LOAD (6)
button once before starting the program.
It is possible to place a cutlery basket inside the basket selected for the
HALF LOAD
program; the
other basket
must remain empty
.
WARNING: do not load dishes and cutlery into the non-selected basket, because the water
spray will only reach the selected basket.
CANCELLING THE CURRENT PROGRAM
To cancel the currently selected program, press the
START/STOP (5)
button for a few seconds,
until the active program appears on the
INFORMATION DISPLAY (8)
. At this point, to halt the
program in progress simultaneously press the
HALF LOAD (6)
button and the
START/STOP (5)
button. The
INFORMATION DISPLAY (8)
will show the letter
P
followed by a dash
(P-)
and the
dishwasher will automatically advance to the end of cycle.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg ls 19 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg ls 19 1 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg ls 19 1

Smeg ls 19 1 User Manual - German - 28 pages

Smeg ls 19 1 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info