Manual Smeg KIV 1007 X (page 20 of 52) (English, German, Dutch, French, Italian, Portuguese, Spanish)

109741

Zoom out

Zoom in

1/52

centre line printed on the drilling template must

correspond to the centre line drawn on the wall, and the

bottom edge of the drilling template must correspond to

the bottom edge of the hood.

3. Place the lower support bracket on the perforation

diagram making it coincide with the traced triangle, mark

the two external holes and perforate. Remove the

perforation diagram, insert two wall-dowels and fix the

support bracket of the hood with two 5x45 mm screws.

4. Hang the hood onto the lower bracket.

5. Adjust the distance of the hood from the wall.

6. Adjust the horizontal position of the hood.

7. Using a pencil mark the cooker hood permanent drill hole

inside the suction group.

8. Remove the hood from the lower bracket.

9. Drill at the point marked (Ø8mm).

10. Insert 1 wall screw anchor.

11. Apply the flues support bracket G to the wall adherent to

the ceiling, use the flues support bracket as a perforation

diagram (if present, the small slot on the support must

coincide with the line drawn previously on the wall) and

mark two holes with a pencil. Make the holes (Ø8mm),

and insert 2 dowels.

12. Fix the chimney support bracket to the wall using two

5x45mm screws.

13. Hook the hood onto the bottom bracket.

14. Fix the hood into its final position on the wall

(ABSOLUTELY ESSENTIAL).

15. Connect a pipe (pipe and pipe clamps not provided, to be

purchased separately) for discharge of fumes to the

connection ring located over the suction motor unit.

If the hood is to be used in ducting version, the other end

of the pipe must be connected to a device expelling the

fumes to the outside. If the hood is to be used in filter

version, then fix the deflector F to the chimney support

bracket G and connect the other extremity of the pipe to

the connection ring placed on the deflector F.

16. Connect the electricity.

17. Apply the chimney stacks and fasten them at the top to

the chimney support G (17b) using 2 screws (17a)

18. Slide the bottom section of the chimney down until it

completely covers the suction unit and slots into the

housing provided on top of the hood.

Remount the carbon filter frame and the fat/s filter/s and check

the perfect functioning of the hood.

Description of the hood

Fig. 1

1. Control panel

2. Grease filter

3. Grease filter release handle

4. Halogen lamp

5. Vapour screen

6. Telescopic chimney

7. Air outlet (used for filter version only)

Operation

Use the high suction speed in cases of concentrated kitchen

vapours. It is recommended that the cooker hood suction is

switched on for 5 minutes prior to cooking and to leave in

operation during cooking and for another 15 minutes

approximately after terminating cooking.

Model with switch-board having 6 push-buttons

1. Switch ON/OFF Pilot-lights:

press to switch on/off lights.

2. Switch OFF suction / ON speed

(rating) of suction speed 1:

press this switch once turn off the

speed (rating) of suction function

that has been selected or (if no

speed rating of suction function

select the speed (rating) of suction

speed 1, press again and keep

pressed to activate the time-

function for 20 minutes (blinking

light), following this the cooker

hood will swittch off.

3. Speed selecting button suction

speed 2: press this switch once to

select the speed rating of suction

speed, press again and keep

pressed to activate the time-

function for 15 minutes (blinking

light) following this the cooker-

hood will switch off.

4. Speed selecting button suction

speed 3: press this switch once to

select the speed rating of suction

speed, press again and keep

pressed to activate the time-

function for 10 minutes (blinking

light) following this the cooker-

hood will switch off..

5. Speed selecting button (speed

rating) for intensive suction

(with timer): press to select the

suction-speed (rating) , the

functioning-time is 5 minutes

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smeg KIV 1007 X in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smeg KIV 1007 X Manual

Product: