332369

Smeg gkl64-3 Manual

8
Zoom out
Zoom in
Previous page
1/15
Next page
Instructions for the Installer
26
5. Adapting to different types of gas
Before carrying out the operations described below, disconnect the appliance
from the electricity supply.
The hob is tested with G20 (2H) natural gas at the pressure of 20 mbar.
If it is to be used with other types of gas, the burner nozzles have to be changed and
the primary air flow adjusted.
To replace the nozzles and adjust the burners, the hob plate has to be removed as
described below.
5.1 Removing the hob skin
Remove all the burner components in the numerical order shown below:
• Remove the pan stands (Fig.1) by lifting them at the back (1) and extracting them
(2). (On 70 cm hobs remove the central pan stand first; on 60 cm hobs the right-
hand pan stand must be removed first);
• remove all the knobs (3, Fig.2) by pulling them outward;
• lift all the burner components off the hob (4-5, Fig. 2);
• use the spanner 6 (Fig. 3) to open the bayonet fastenings of the burner fixing rings,
applying leverage on the guides 7;
• after removing all the components described above, lift the front of the hob skin (8,
Fig. 4).
• the burners and gas taps can only be accessed by pushing the rear of the hob
gently upwards with the aid of a tool (9-10, Fig. 5).
This is necessary to release the internal snap fixing devices. The hob skin can now be
removed. Some models may have 2 additional pins at the side (Fig. 5), which must be
removed in the same way, using a tool to apply leverage to the hob.
Fig
1) Fig 2)
Fig 3)
Fig
4) Fig 5)
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg gkl64-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg gkl64-3 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg gkl64-3

Smeg gkl64-3 User Manual - German - 17 pages

Smeg gkl64-3 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info