77675
9
Zoom out
Zoom in
Previous page
1/31
Next page
142468
Required tools; socket spanner nr. 8,
screwdriver, torx 25.
Caution! After unscrewing of before xing hinges,
hold the door to prevent it from falling and
damaging.
1. Remove upper hinge cover (save it for eventual
later use), remove also the cover on the opposite
side of the upper hinge cover (on the opposite
side you will insert the attached cover during the
assembly), and remove the cover on the opposite
side of the upper part of the door.
2. Unscrew upper hinge screws and remove the
upper door from the middle hinge.
3. On the bottom side of the upper door unscrew the
swing stopper screws and remove the stopper
(A). Keep this for eventual use later on. Fix the
attached stopper with its bearing on the opposite
side of the door.
4. Unscrew the forced door closure system (B)
and x it to the opposite side of the door (certain
models only).
5. Unscrew middle hinge screws, remove the door
from bottom hinge.
6. Unscrew leg holder xing screws.
7. Tilt the appliance backward (max. 35°) to lean
to the rear side of the cabinet. Unscrew the
leg support screws (C) - left and right, and
remove the leg support cover (D) and place it to
the opposite side. Unscrew and remove, then
reciprocally replace the position of end switch (E)
and decorative peg (F) (for models with forced
door closing system). Unscrew three screws
xing the bottom hinge (save the hinge for later
use), and x the attached bottom hinge on the
opposite side.
8. Repeat the procedure 3 and 4 on the bottom
door. In case there is no bottom door limit peg,
transfer the bearing (G) and washer to the
opposite side of the door.
9
Reverse door swing
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg FC 375 B NF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg FC 375 B NF in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg FC 375 B NF

Smeg FC 375 B NF User Manual - German - 36 pages

Smeg FC 375 B NF User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info