715190
26
Zoom out
Zoom in
Previous page
1/36
Next page
Instructions
28
6 Installation
6.1 Electrical connection
Power voltage
Danger of electrocution
• The appliance must be connected to
ground in compliance with electrical
system safety standards.
• Do not pull the cable to remove the
plug.
General information
Check the mains characteristics
against the data indicated on
the plate. The identication plate
bearing the technical data, serial
number and brand name is visibly
positioned inside the appliance.
Do not remove this plate for any
reason.
Make sure that the plug and socket
are of the same type.
Avoid using adapters, gang sockets
or extensions as these could cause
overheating and a risk of burns.
The plug must always be accessible
when the appliance is installed.
Leave the appliance standing ver-
tically for at least two hours before
turning it on for the rst time.
If it is necessary to replace the
power cable, this must be performed
by an authorised technician from
Technical Support Service.
6.2 Positioning
Heavy appliance
Crushing hazard
• Position the appliance with the aid
of a second person.
Pressure on the open door
Risk of damages to the ap-
pliance
• Never use the open door to lever
the appliance into place when
tting.
• Avoid exerting too much pressure on
the door when open.
• The appliance must not be exposed
to direct sunlight.
• The appliance must not be placed
near sources of heat. If this is not
possible, a suitable insulation panel
must be used.
• Do not use the appliance outdoors.
Choice of location
Always install the appliance in a dry
place with satisfactory ventilation.
The appliance must not be installed
near heat sources. If this is not possi-
ble, a suitable insulation panel must
be used.
If installed underneath wall units, at
least 5 cm clearance must be left.
Ensure that the appliance is located
with sufcient space for the door to
open and for the internal drawers
and shelves to be removed, if neces-
sary.
Installation
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg FAB38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg FAB38 in the language / languages: English as an attachment in your email.

The manual is 2.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg FAB38

Smeg FAB38 User Manual - Dutch - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info