682756

Smeg CMS4601NR Manual

13
Zoom out
Zoom in
Previous page
1/23
Next page
12 13
EN
Changing coee temperature
To change coee temperature, proceed as follows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “TEMPERATURE” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) to select the required
coee temperature from low, medium and high.
• PresstheOKbutton(B9)toconrmthetemperatureselect-
ed.
• Pressthe icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• removethe“TotalHardnessTest”strip(attachedtopage2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “WATER HARDNESS” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) until the number co-
incides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message “WATER HARDNESS 3”
• PresstheOKicon(B9)toconrm.
The coee maker is now programmed to provide the des-
cale warning when actually necessary.
Programming coee
For instructions on programming coee, see the “CHANGING THE
QUANTITY OF COFFEE IN THE CUP” section.
Programming cappuccino
For instructions on programming cappuccino, see the section
“CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO”.
Programming the jug
This function is not supported by this model.
Programming water
For instructions, see the “CHANGING THE QUANTITY OF HOT WA-
TER” section.
Descaling
Important! Descaler contains acids.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
N.B.: Use the descaler recommended by the manufac-
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When “PLEASE DESCALE !” is displayed, the machine requires
descaling.
Proceed as follows:
• makesurethemachineisready;
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “DESCALE” is displayed.
• PresstheOKicon(B9).
The message “ADD DESCALER PLEASE CONFIRM” is dis-
played.
• Emptythetankofwater,pourthecontentsofthedescaler
bottle into the tank respecting the instructions given on the
descaler pack, then add water.
Position a container with a capacity of about 2 litres under
the hot water spout.
• PresstheOKicon(B9).Descalerowsoutofthehotwater
spout into the container below.
The appliance displays: “DESCALING”.
• Thedescaleprogrammeautomaticallyperformsaseriesof
deliveries and pauses.
• Afterabout30minutes“DESCALECOMPLETEPLEASECON-
FIRM” is displayed.
• PresstheOKicon(B9).“RINSINGFILLTANK”isdisplayed.
• Emptythewatertank,rinsetoeliminatedescalerresidues,
then ll with clean water.
• Replacethetankfullofcleanwater.
“RINSING PLEASE CONFIRM” is displayed again.
• PresstheOKicon(B9)again.
Hot water ows out of the spout into the container below
and “RINSING” is displayed.
• Wait until“RINSING COMPLETE PLEASE CONFIRM” is dis-
played.
• PresstheOKicon(B9).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg CMS4601NR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg CMS4601NR in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg CMS4601NR

Smeg CMS4601NR User Manual - German - 23 pages

Smeg CMS4601NR User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info