682752
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
rst turn the appliance o by pressing the button
(g.9);
release the main switch (A23) situated on the side of the
appliance (g.2).
Important!
Never press the main switch while the appliance is on.
MENU SETTINGS
Rinsing
Use this function to supply hot water from the coee spouts
(A13) to clean and heat the appliance’s internal circuit. Place a
container with a minimum capacity of 100ml under the coee
and hot water spouts (g.8).
To enable the function, proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display shows (B)
RINSING;
3. Press to start rinsing.
Danger of burns!
Do not leave the appliance unattended while hot water is being
delivered.
1. After a few seconds, hot water comes out of the coee
spout which cleans and heats the internal circuit of the
appliance: the following message is shown on the display
RINSING HOT WATER RUNNING as well as a progress bar
which lls up as the preparation progresses;
2. To stop the rinsing cycle, press or wait for rins-
ing to stop automatically.
Please note:
If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend doing 2/3 rins-
es before use;
After rinsing, it is normal that there is some water in the
grounds container (A10).
De-scaling
For instructions on de-scaling, see section “De-scaling”.
Water lter
For instructions on how to install the lter (C4), see section
“Water softener lter”.
Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until DRINKS SETTINGS
appears on the display (B);
3. Press : The values for the rst beverage appear on the
display;
4. The reference user prole is highlighted on the display. The
values are shown on the vertical bars: the manufacturer de-
fault value is indicated by the symbol while the cur-
rent set value is highlighted by the lled part of the vertical
bar;
5. To go back to the settings menu, press .
To scroll and display the beverages, press ;
6. To return to the default manufacturer values for the bever-
age shown on the display, press RESET;
7. CONFIRM RESET?: to conrm, press (to cancel,
press );
8. RETURN TO FACTORY: press .
The beverage has been reset to the default values. Continue with
the other beverages, or go back to the settings menu.
Please note:
To change the beverages for another prole, go back to the
homepage, select the required prole (B11) and repeat the
procedure.
To reset all the beverages in the prole to the default val-
ues, see paragraph “Manufacturer Default values”.
Set time
To adjust the time on the display (B), proceed as follows:
1. Press (B2) to enter the menu;
2. Press (B10) or (B8) until the display (B) shows
SET TIME;
3. Press : The time setting panel appears on the screen;
4. Press or corresponding to the hours and minutes
until the current time is displayed;
5. To conrm, press (to cancel, press ), then
press to go back to the homepage.
The time is now set.
Auto-start
The auto-start time can be set in order to have the appliance
ready at a certain time (for example in the morning) so that it
can immediately make coee.
Please note:
To enable this function, the time must already be set correctly,
see paragraph “Set time ”.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg CMS4104S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg CMS4104S in the language / languages: English as an attachment in your email.

The manual is 13,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg CMS4104S

Smeg CMS4104S User Manual - German - 32 pages

Smeg CMS4104S User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info