712785
19
Zoom out
Zoom in
Previous page
1/146
Next page
4 - EN
DESCRIPTION OF THE
APPLIANCE (Fig. A)
1 Motor base
2 Coffee bean container (350 g)
3 Coffee bean container lid
4 Ground coffee container with lid
5 Container support plate
6 START/STOP button
7 Grinding functions selection knob
8 Grinding level adjustment lever
9 Grinder
10 Cleaning brush
11 Centring filter support
IDENTIFICATION PLATE
The identification plate states the technical
data, serial number, and marking. The
identification plate must never be removed.
BEFORE FIRST USE
(Fig. A)
Unpack the appliance carefully and remove
all packaging materials and promotional
labels.
Wash all components, except for the motor
base (1) and the grinder (9), with hot water
and normal washing-up liquid. Rinse all
components thoroughly and dry them before
using them.
The grinder must never be
washed and must always be kept
dry. Clean the grinder with the
cleaning brush provided or with
a hard-bristle brush.
Before use, check that all components
are integral and have no cracks.
ASSEMBLY OF COMPONENTS
(Fig. B-C-D)
Place the container (2) on the motor
base (1) matching up the two
reference notches “ ” “
on the left side of the motor body (1).
Next rotate the container (2) clockwise until
the two “ ” “ ” indications match.
• Position the lid (3) on the container (2) and
press it down.
• Position the plate (5) on the motor base (1)
in a way to secure it.
Open the silicone cap of the ground coffee
container (4) and position it on the plate (5).
Make sure that the rubber dispenser cone
is centred in the hole of the container lid (4)
as shown in Fig. D.
DESCRIPTION OF CONTROLS
(Fig. E-F)
Grinding adjustment lever (8)
The appliance has a lever (8), which allows
to adjust the level of grinding appropriate to
your use:
FINE
Fine grinding
MEDIUM
Medium grinding
COARSE
Coarse grinding
Move the lever to make the indicator (12)
correspond with the desired grinding level.
Description/Assembly/Commands
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg CGF01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg CGF01 in the language / languages: All languages as an attachment in your email.

The manual is 15,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info