77121
10
Zoom out
Zoom in
Previous page
1/27
Next page
Instructions for the User
39
10. USING THE MAIN OVEN
10.1 First use
At first use, or after a power failure, the oven's display will show a flashing symbol. To be able to
start any cooking function with the main oven, the current time must be set.
10.2 Setting the current time
To adjust the current time with the flashing display:
Press the buttons or to decrease or increase the time shown. If the button is held down in
one direction the time changes faster.
When any button is released, after a few seconds the display will stop flashing and only the colon
seperating the hour and minutes will flash to indicate its correct operation (The symbol will be
shown on the display).
It might become necessary to change the current time, for example for daylight savings time.
hold down the button for a few seconds until the symbol stops flashing.
Repeat the operations described in point “10.2 Setting the current time”.
10.2.1 Using the minute minder
The minute minder can be used during cooking or when the oven is turned off. The setting procedure is
the same for both cases.
Press the button briefly, the symbol will flash and the display will show the symbol (or the
time remaining from a previously programmed count).
Press the buttons
or to increase or decrease the minute minder time from 00:01 to 03:59 (hold
the button down to go faster). After a few seconds the count will begin and the remaining time and the
non-flashing symbol will appear on the display.
To reset the minute minder, press the and buttons at the same time for approximately one
second.
Warning: The minute minder does not stop the cooking but rather informs the user when the set time has
run out. To turn off the oven, turn the PT2 knob to the O position.
Modifying the programmed data:
Once the count has begun, the previously set data can be modified. Repeat the operations described in
point “10.2.1 Using the minute minder”.
10.3 Selecting a function
A cooking function can be selected by simply turning PT2 to the right or left to the desired function. After
having selected the cooking function, use the PT1 knob to select the desired temperature.
Cooking is preceded by a preheating stage, which allows the oven to heat to the cooking temperature
more quickly. The symbol flashes on the display to indicate that this stage is in progress. When the
preheating stage is over, the symbol will remain on and a buzzer will sound to indicate that the food
can be placed inside the oven.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg CE 9 IMX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg CE 9 IMX in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg CE 9 IMX

Smeg CE 9 IMX User Manual - German - 27 pages

Smeg CE 9 IMX User Manual - Dutch - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info