328074
4
Zoom out
Zoom in
Previous page
1/4
Next page
10
Instructions for the installer
PRIMARY AIR ADJUSTMENT
1 Loosen the adjustment screw A of the air
regulation sleeve.
2 Extract or insert the registration sleeve B to the
position that corresponds to the type of gas to be
used according to the table below.
3 Tighten the adjustment screw making sure that the
distance X is correct (See table below).
METHANE (N) G30/G31 (GPL)
X= 1 mm 15 mm
BURNER MINIMUM ADJUSTMENT
CONVERSION FROM GPL GAS TO METHANE
GAS
1 Extract the knob.
2 Make sure that the by-pass inside is fully screwed
in. Use a screw driver inside the tap rod or at the
side (See the drawing at the side).
3 Turn the by-pass according to the table
BURNER,
NOZZLE AND GAS CONSUMPTION
CHARACTERISTICS
4 When the adjustments are completed, insert the knob and light the relative
burner bringing it to the minimum position . The flame at minimum should
be regular.
5 Check the stability of the flame by rapidly turning the knob from the
maximum to the minimum position. The flame should not go out.
6 If the minimum flame is not regular, remove the knob and move the by-pass
with small clockwise or counter-clockwise turns and repeating the flame
stability check. If the flame is regular, the minimum adjustment operation
has been successful.
CONVERSION FROM METHANE GAS TO GPL GAS
1 Extract the knob.
2 Turn the by-pass inside, screwing it in fully. Use a screw driver inside the
tap rod or at the side (See the drawing).
A
B
X
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg bq91c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg bq91c in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg bq91c

Smeg bq91c User Manual - German - 4 pages

Smeg bq91c User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info