736887
80
Zoom out
Zoom in
Previous page
1/94
Next page
Installation
174
5 Installation
5.1 Gas connection
Connection to the gas mains can be made
using a continuous wall steel hose in
compliance with the guidelines established
by the standards in force. For supplying it
with other types of gas, see chapter “
Adaptation to different types of gas”.
The gas inlet connection is threaded ½”
external gas (ISO 228-1).
Connection with a rubber hose
Verify that all following conditions are met:
the hose is fixed to the hose connection
with safety clamps;
no part of the hose is in contact with hot
walls (max. 50 °C);
the hose is not under traction or tension
and has no kinks or twists;
the hose is not in contact with sharp
objects or sharp corners;
if the hose is not perfectly airtight and
leaks gas, do not try to repair it; replace
it with a new hose.
Check that the hose is not past its expiry
date (printed on the hose itself).
Gas leak
Danger of explosion
After carrying out any operation, check
that the tightening torque of gas
connections is between 10 Nm and
15 Nm.
If required, use a pressure regulator that
complies with current regulations.
At the end of the installation, check for
any leaks with a soapy solution, never
with a flame.
Installation using a hose must be carried
out so that the length of the hose does
not exceed 2 metres when fully
extended for steel hoses and 1.5 metres
for rubber hoses.
The hoses should not come into contact
with moving parts and should not be
crushed in any way.
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smeg A1NLK-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smeg A1NLK-9 in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smeg A1NLK-9

Smeg A1NLK-9 User Manual - Dutch - 94 pages

Smeg A1NLK-9 User Manual - French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info