729809
58
Zoom out
Zoom in
Previous page
1/135
Next page
C
HAPTER
4
| Configuring the Router
Wireless
– 58 –
Figure 47: Note Dialog
N
OTE
:
Limited by local law regulations, the version for North America does
not have a region selection option.
Channel - This field determines which operating frequency will be used
for wireless operation. The default setting is Auto, so the AP will choose
the best channel automatically. It is not necessary to change the
wireless channel unless you notice interference problems with another
nearby access point.
Mode - Select the operating mode. The default is 11b/g/n mixed.
11b only - Select if all of your wireless clients are 802.11b.
11g only - Select if all of your wireless clients are 802.11g.
11n only- Select only if all of your wireless clients are 802.11n.
11b/g mixed - Select if you are using both 802.11b and 802.11g
wireless clients.
11b/g/n mixed - Select if you are using a mix of 802.11b, 11g,
and 11n wireless clients.
When 802.11g mode is selected, only 802.11g wireless stations can
connect to the Router. When 802.11n mode is selected, only
802.11n wireless stations can connect to the Router. It is strongly
recommended to set the mode to 11b/g/n mixed, then all 802.11b,
802.11g, and 802.11n wireless stations can connect to the Router.
Channel width - Select any channel width from the pull-down list. The
default setting is automatic, which can adjust the channel width for
your clients automatically.
N
OTE
:
If 11b only, 11g only, or 11bg mixed is selected in the Mode field,
the Channel Width selecting field will turn grey and the value will become
20M, which cannot be changed.
Max Tx Rate - You can limit the maximum transmit rate of the Router
through this field.
Enable Wireless Router Radio - The wireless radio of this Router can
be enabled or disabled to allow wireless stations access.
Enable SSID Broadcast - When wireless clients survey the local area
for wireless networks to associate with, they will detect the SSID
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMC WBR14S-N5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMC WBR14S-N5 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info