67893
16
Zoom out
Zoom in
Previous page
1/44
Next page
1/29/2008 VoIP Phone Administration Guide
MAG-07010 Rev. C
9
3 Setup the VoIP Phone via a Web Browser
Default the IP Phone’s Bridge is enabled, WAN port is in DHCP Client Mode. LAN port is the same as WAN.
Connect the IP Phone to DHCP server, and the server will assign an IP address to the phone. Check the IP
address and add the port number “:9999” at the end of the IP address to access the web browser.
Note: When selecting DHCP Client and cannot detecting the IP, the IP Phone will provide a default IP,
192.168.2.25.
Note: It is highly recommended to use Internet Explorer 6.0 for web configurations.
3.1 Login
Please input the username and password into the blank field. The default setting is:
1. For the Administrator, the username is: admin; and the password is: smcadmin. If you use the account login,
you can configure the setting.
2. For a normal user, the username is: user; and the password is: test. If you use the account login, but you
can not configure the SIP setting.
Click Login to move into the VOIP PHONE web based management information page.
Any changes in the Web Management interface except for Phone Book require clicking Submit in that page, and
then go to the Save Change page and click Save. The system will restart, and all the settings can work properly.
Note: The GUI will automatically log out after 5 minutes, if you do not do any action.
3.2 System Information for the IP PHONE
When you login to the web page, you can see the current system information of the IP phone, like Firmware
Version and Vendor ID in this page.
Also you can see the function lists in the left side. You can use mouse to click the function you want to set up.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMC SMCDSP-205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMC SMCDSP-205 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMC SMCDSP-205

SMC SMCDSP-205 Specifications - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info