590664
9
Zoom out
Zoom in
Previous page
1/14
Next page
9
Step 16:
Decide where you want to mount you main unit! We advice to mount it out of sight, so that in case of burglary it wil not
easy be found! You need to connect the internet (LAN) cable and plug in the adaptor! Use the template paper to mark
the positions of the screws on the wall. Leave the screw head protruding for about 7mm so it can push the tamper switch
(on the back of the Gateway) into place.
Step 17:
Install Motion Sensors and Magnetic Contact Sensors on the place you think they are the most effective! Montion Sensors
secure a complete Area of 110° x 10 meter. Install in the rooms which are attractive fur the burglar a Motion Sensor.
Don't point the Sensor to windows or heathers! When a Motion Sensor registers Motion it will give a signal to the main
unit. Magnetic Contact Sensors secures one door or window. Install on the doors or windows which are interesting for the
burglar a Magnetic Contact Sensor. When a door or window is opened, it will give a signal to the main unit.
Advice:
We advice to make a drawing of your home and mark the burglary
sensitive points with a red arrow! When you have done
this you are going to fill in where you want to install motion- and magnetic sensors! When you have filled in all sensors,
you mark
them if you want them active at night, or only when you are out. We advise to
install also minimum a indoor
siren, on a strategic place. I case of burglary
everybody in the house must be warned. Depending on the neighbour-hood it
is
also wise to install a outdoor siren! They are all wireless, so easy to install. If you
live with more persons in one house, or
doesn't like to take the remote, or open
the app everytime to activate or deactivate the system, then we advice to add a
keypad! You can give per person a code, so you can always see who activated or
deactivated the system! For total security
of your home you also can add; smoke-
and waterdetectors and a connected to your alarmsystem Internet camera!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares HA701 IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares HA701 IP in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smartwares HA701 IP

Smartwares HA701 IP User Manual - Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info