687092
33
Zoom out
Zoom in
Previous page
1/75
Next page
EnableHighlight to enable the Motion Detection function. Corresponding settings can only be
defined after Enable is ticked;
Sensitivity
Six settings based on sensitivity level;
RegionClick Setting to enter the area which is divided into PAL22X18. Colored areas are the areas
covered by motion detection while dark areas are not covered. Set areas as Figure 4.5. Hold down the
left mouse button to toggle the grid blocks. All areas default to covered
Figure 4.5 Set Area
Arm/Disarm Schedule
DVR triggers motion detection alarm signal only during the time periods
set up as in Figure 4.6. Recording can be scheduled weekly or in a general calendar. Each day is divided
into four time sections. The time range will take effect only if the checkbox
before the time range is
ticked.
Figure 4.6 Time Range Setup
Time IntervalWithin the scheduled time interval, if there are several occurrences, the detection only
triggers alarm in sequence;
Alarm OutputWhen motion occurs, the setting will activate corresponding external devices
connected to the alarm output port;
DelayIndicate the extended time for which the alarm will continue after the alarm ends, ranging from
10~300 seconds
Recording ChannelSelect the desired recording channel (Can be ticked). When alarm is triggered,
the system will activate the recording signal on that channel;
Note: To perform corresponding video recording, it requires the settings in Record Settings
to
activate test recording in the defined time periods
Page 33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares DVR728S - 10.037.81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares DVR728S - 10.037.81 in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smartwares DVR728S - 10.037.81

Smartwares DVR728S - 10.037.81 User Manual - German - 79 pages

Smartwares DVR728S - 10.037.81 User Manual - Dutch - 78 pages

Smartwares DVR728S - 10.037.81 User Manual - French - 80 pages

Smartwares DVR728S - 10.037.81 User Manual - Spanish - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info