687093
34
Zoom out
Zoom in
Previous page
1/75
Next page
Auto SequenceHighlighted
indicates it is selected. When alarm signal is present, the selected
channel will start single-screen auto sequence preview. The interval for auto sequence is
defined in
System Settings>Auto Sequence Settings
SnapshotSelect the desired recording channel (Can be ticked). When alarm is triggered, the
system will activate a snapshot signal on that channel
Note: To perform the corresponding snapshooting, it requires the settings in Record Settings
to
activate test recording in the defined time periods
PTZ LinkageWhen alarm occurs, the PTZ on the defined channel will coordinate the action. Set it as
shown in Figure 4.7
Note: To coordinate PTZ, you need to set parameters for preset points, point-to-point patrol, and
auto sequence in Quick Launch>PTZ Control
Figure 4.7 PTZ Linkage
Video DelayAfter the alarm status ends, the alarm recording will continue for an extended time,
ranging from 10~300 seconds
Screen PromptThe on-screen alarm information prompt pops up on local display
EMAIL NotificationHighlight indicates that email notification will be sent to the user when alarm
occurs.
Note: EMAIL Notification requires appropriate settings in Network Service.
Beep The device generates two long buzzer beeps when alarm occurs.
4.3.2 Video Blind
When the video image is affected by external conditions such as dim light and reaches the sensitivity
setting, it will trigger the video blind alarm and activate coordinating functions.
Note: Advanced key is the same as the right mouse button.
Page 34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smartwares DVR724S - 10.037.77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smartwares DVR724S - 10.037.77 in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smartwares DVR724S - 10.037.77

Smartwares DVR724S - 10.037.77 User Manual - German - 79 pages

Smartwares DVR724S - 10.037.77 User Manual - Dutch - 78 pages

Smartwares DVR724S - 10.037.77 User Manual - French - 80 pages

Smartwares DVR724S - 10.037.77 User Manual - Spanish - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info