490907
69
Zoom out
Zoom in
Previous page
1/78
Next page
V
ersion: 09.01.2008
User Manual
Digital Satellite Receiver
MX 04
Details see page 46
Preface
2 EN Smart MX 04
Preface
Dear Customer,
thank you for buying the Smart MX 04 Free-To-Air Digital Satellite Receiver.
Please read this user manual carefully before using this device.
This operating manual will help you in the
appropriate,
safe and
favorable
usage of the digital satellite receiver, in short, the receiver. We assume that
the user of the receiver has overall knowledge regarding the handling of audio
and video equipment.
Each person who
installs,
connects,
operates,
cleans or
disposes of
this receiver must be familiar with the entire content of this operating manual.
Always keep this operating manual in the proximity of the receiver.
Please keep this instruction manual for consulting near by the receiver.
WELA electronic Handels GmbH
Use Raps!
After switching on the receiver for the first time or after default
reset you will be asked if you would like to use RAPS. Select
yes by pressing OK on the remote control.
For mo
re information see chapter RAPS on page 46.
Contents
Smart MX 04 EN 3
Contents
Preface ............................................................................................................. 2
Contents........................................................................................................... 3
Safety Instructions.......................................................................................... 6
Electrical Connection ........................................................................................ 6
Correct Battery Handling................................................................................... 7
Appropriate Usage .......................................................................................... 7
Scope Of Supply ............................................................................................. 8
Description....................................................................................................... 8
Control Elements / Functions ........................................................................ 9
Front Side.......................................................................................................... 9
Remote Control ............................................................................................. 10
Rear Side With Modulator (optional)............................................................... 12
Inserting Of Batteries ...................................................................................... 13
Replacing Of Batteries .................................................................................... 13
Safety Instructions........................................................................................... 13
Connecting The Receiver ............................................................................. 14
Connecting The Satellite Antenna .................................................................. 14
Connecting The TV-Set................................................................................... 15
Connecting A Dolby-Digital Device ................................................................. 15
Operation......................................................................................................... 15
Start Operating The Receiver....................................................................... 16
Switching On The Receiver............................................................................. 16
Operating At The Front Panel ...................................................................... 17
Navigation In The Menus.............................................................................. 18
Insert Code..................................................................................................... 18
Edit Channel .................................................................................................. 19
TV Channel List............................................................................................... 19
Radio Channel List.......................................................................................... 21
Delete All ......................................................................................................... 21
Contents
4 EN Smart MX 04
Installation ..................................................................................................... 22
Antenna Connection........................................................................................ 22
Satellite List..................................................................................................... 22
Antenna Setup ................................................................................................ 22
Single Satellite Search .................................................................................... 26
Multi Satellite Search ...................................................................................... 27
TP List ............................................................................................................. 28
System Setup................................................................................................. 29
Language ........................................................................................................ 29
TV System....................................................................................................... 31
Local Time Setting .......................................................................................... 34
Timer Setting................................................................................................... 35
Parental Lock .................................................................................................. 38
OSD Setting .................................................................................................... 40
Favorite ........................................................................................................... 41
Other ............................................................................................................... 42
Tools............................................................................................................... 44
Information ...................................................................................................... 44
Factory Setting ................................................................................................ 45
SatcoDX Auto Programming ........................................................................... 45
SW Upgrade by OTA ...................................................................................... 45
RAPS .............................................................................................................. 46
What is RAPS? ............................................................................................... 46
Install or update RAPS automatically.............................................................. 47
Adjust Local TV Channel................................................................................. 49
Allow Erotic Channels ..................................................................................... 49
Show Pay-TV Channels .................................................................................. 50
Hiding Channel lists ........................................................................................ 51
Hide Some Languages.................................................................................... 52
Activate And Deactivate The Automatical Checking Of The RAPS List ......... 53
Manual Updating Of The RAPS List ............................................................... 54
Change RAPS Settings Belated...................................................................... 54
Contents
Smart MX 04 EN 5
Games ............................................................................................................ 56
Tetris ............................................................................................................... 56
Othello ............................................................................................................. 56
Operation With The Remote Control........................................................... 58
Switch The Receiver On And Off .................................................................... 58
Change The Volume ....................................................................................... 58
Change The Channel ...................................................................................... 58
Teletext............................................................................................................ 58
Electronic Program Guide ............................................................................... 59
Favorite List..................................................................................................... 59
Find A Channel ............................................................................................... 60
Zoom Function ................................................................................................ 61
Satellite Overview ........................................................................................... 62
TV Switch ........................................................................................................ 62
Sleep Timer..................................................................................................... 62
Program Information ....................................................................................... 63
Mosaic ............................................................................................................. 64
Pause Function ............................................................................................... 64
Switching Channels......................................................................................... 64
Audio Settings ................................................................................................. 65
Muting.............................................................................................................. 65
Storing Of Product ........................................................................................ 66
Cleaning ......................................................................................................... 66
Troubleshooting............................................................................................ 67
Disposal ......................................................................................................... 68
Technical Specifications .............................................................................. 69
Supplier .......................................................................................................... 71
Warranty......................................................................................................... 71
Declaration of Conformity ............................................................................ 71
Safety Instructions
6 EN Smart MX 04
Safety Instructions
Attention!
Please read the safety instructions carefully before operating
the receiver.
Please follow all warnings and instructions on the equipment
and in the operating manual.
Electrical Connection
Do not expose the receiver to rain as well as any kind of humidity to avoid
risk of fire and electric shock.
Connect the receiver only to a professionally installed mains socket of
175–240 V, 50–60 Hz.
Never open the casing. Otherwise there is a risk of electric shock.
Ensure that the power source (socket) is easily accessible.
Pull out the mains plug from the socket if the equipment is not in use for a
longer period of time. Always pull out only at the mains plug.
If foreign substances or fluids access the receiver, immediately pull out the
mains plug from the socket. Ask a qualified person to check the equipment
before operating it once again. Otherwise there is a risk of electric shock.
The total power consumption by the antenna connection of the receiver
"LNB IN“ must not exceed 400 mA.
Do not bend or crimp the mains cable.
Never touch the mains cable with humid hands. Otherwise there is a risk
of electric shock.
If the mains cable is damaged, the receiver must be repaired by an expert
before reusing it. Otherwise there is a risk of electric shock.
Never allow children to operate the receiver or to play with the antenna
unit unless supervised.
Always ask qualified personnel to carry out maintenance jobs. Otherwise
you are putting yourself and others at risk.
Disconnect the receiver from the power source in case of operational
disruptions.
Never cover ventilation slits. Ensure adequate ventilation.
Appropriate Usage
Smart MX 04 EN 7
Do not expose the apparatus to dripping or splashing. Do not place water-
filled objects like vases on or atop of the receiver. Otherwise, there is a
risk of electric shock.
Place the receiver on a stable and smooth base.
Avoid proximity to heat sources, like e. g. heaters, naked flames, like e. g.
candles, devices with strong magnetic fields, like e. g. loudspeakers.
Avoid direct sunlight and places with an extremely high amount of dust or
high humidity.
Do not place any heavy objects on the receiver.
Humidity may settle in the receiver if is brought from cold into hot
surroundings. In this case, please wait for about two or three hours before
operating the equipment.
Never cover ventilation slits. Ensure adequate ventilation by maintaining a
safety distance of 5 cm to other objects.
Arrange the mains and antenna cable in such a manner that no one steps
or trips over them.
Use the apparatus only in moderate climates (not in tropical climates).
Correct Battery Handling
Batteries may contain toxic agents. Ensure that batteries are not within the
reach of children. Children may eat and swallow batteries.
Leaking batteries may cause damages at the remote control. Batteries
may contain toxic agents that are hazardous to the environment.
Therefore, dispose of the batteries immediately according to the prevailing
statutory regulations. Never throw the batteries in normal household
waste.
Appropriate Usage
The digital satellite receiver receives digital channels in a covered area. It is
exclusively meant for this purpose and should only be used for the same. This
also includes paying attention to all information in this operating manual
especially that of safety instructions.
Any other usage is considered to be improper and may lead to material
damages and even personal injuries.
The manufacturer does not bear any liability for damages caused due to
improper usage.
Scope Of Supply
8 EN Smart MX 04
Scope Of Supply
Please check the scope of supply after purchase. If any part is missing, please
contact your dealer.
The Satellite Receiver Smart MX 04,
Remote Control,
2 pieces of batteries (type AAA) for the remote control,
Instru
ction Manual.
Description
With the Smart MX 04 Free-To-Air Digital Satellite Receiver you can receive
Free-To-Air channels. There are hundreds of free digital TV and Radio
channels which can be received.
The digital satellite receiver Smart MX 04 has a mains connection of
175 - 250 V AC, 50/60 Hz.
The most common di
gital broadcasting stations of the mostly used satellites
are pre-programmed. You can receive the digital channels broadcasted
through these satellites as soon as you have connected the receiver to a
satellite antenna and oriented it to one of these satellites.
All functions of the Receiver can be operated with the remote control. All
receiver settings can be done easily using the user interface (menu) on the
TV-monitor. The user interface supports multiple languages.
Control Elements / Functions
Smart MX 04 EN 9
Control Elements / Functions
Front Side
Figure 1: Control Elements at the front side
No. Symbol Description
1 Display Channel display
2 PR
Button to switch the channels downwards step by
step
3 PR
Button to switch the channels upwards step by
step
4 On/Off switch Switch between power and standby
5 Standby LED Indicator of standby
Remote Control
10 EN Smart MX 04
Remote Control
Remote Control
Smart MX 04 EN 11
No. Button Description
1 Standby Switches between operation and standby mode.
2
Numeric
buttons (0~9)
For direct choice of channels or for numeric or
alphanumeric figures.
3 TV/Radio Switches between TV and radio mode.
4 EPG
Shows detail information for individual channels.
Press again for going back to previous mode.
5 VOL (+/-)
Turns up/down volume or changes the page of
channel list.
6 FAV Shows current favorite channel list.
7 Find Find a channel.
8 TXT
Displays teletext information, if the broadcaster
supports it.
9 SAT Shows the programmed satellites.
10 TV/AV Switches on and off the TV scart output.
11 SLEEP Sleep Timer.
12 INFO Displays the program information on the screen.
13 Mosaic Displays several channels on the screen.
14 Pause Pauses to freeze the screen.
15 Audio Changes between different audio modes.
16 ZOOM Magnification of display details.
17 Up Switches between the satellites.
17 Down Switches between the satellites.
18 EXIT Back to former status.
19 PR (+/-)
Changes channels or moves the cursor upwards
and downwards in the menu.
20 OK
Displays the channel list and selects the item on
the menu.
21 MENU Moves to main menu during TV viewing.
22 Change to the previous selected channel.
23 Mute Turns sound on or off.
PR
Remote Control
12 EN Smart MX 04
Rear Side With Modulator (optional)
Figure 2: rear side of receiver
No. Symbol Description
1 POWER On / Off switch for main supply
2 VIDEO Video output (Composite)
3 AUDIO-L Audio output left
4 SPDIF Digital output
5 VCR SCART output for Video
6 TV SCART output for TV
7 LNB OUT Satellite signal loop through out
8 LNB IN Digital satellite signal input
9 RF-IN Antenna input
10 RF-OUT Antenna output
11 RS232 Serial Low-Speed-Interface
12 AUDIO-R Audio output right
13 0/12V 0/12 Volt-output
14
175 - 250 V AC,
50/60 Hz
mains connection
Remote Control
Smart MX 04 EN 13
Inserting Of Batteries
Figure 3: Inserting of batteries into the remote control
Open the battery compartment on back side of remote control. Insert two
batteries type AAA according to polarities mentioned on the battery
compartment. Push the cover of the battery com
partment carefully till the
cover is locked.
Replacing Of Batteries
Replace discharging batteries on time. Always replace both batteries
simultaneously and use batteries of the same type.
Safety Instructions
Attention!
Do not recharge or destruct normal batteries. Do not throw
them into fire.
Batteries may contain toxic agents that are hazardous to
health and environment. Therefore, dispose of the batteries
immediately according to the prevailing statutory regulations.
Never throw the batteries in normal household waste.
Note!
Always insert the batteries according to their polarities.
Batteries which are getting discharged may damage the
remote control. If you do not use the receiver for a longer
period of time, remove the batteries from the remote control.
Connecting The Receiver
14 EN Smart MX 04
Connecting The Receiver
Attention!
Check that connections of all equipment and the antenna are
proper before connecting the receiver to the mains.
Figure 4: connection scheme
Connecting The Satellite Antenna
Connect the cable of the satellite antenna with the receiver. Screw the
F-connector of the cable to the LNB IN socket of the receiver.
Connecting The Receiver
Smart MX 04 EN 15
Connecting The TV-Set
Connect your TV-Set with the Scart output for TV. Alternatively you can also
use the connectors AUDIO-L, AUDIO-R and VIDEO.
If the receiver has a modulator, you can connect the RF-OUT of the receiver
with the
antenna input of the TV-Set. If you want to receive programs as well
via the house antenna, you must connect the RF-IN socket of the receiver with
the antenn
a socket in your house.
When all antenna cables are connected, you can select a free channel on your
TV-Set and start the channel search. Please look for details in the user
manual of your TV-Set.
The output channel of the modulator is pre-set to channel 38.
Connecting A Dolby-Digital Device
If you want to connect a Dolby-Digital device, you can connect it with a coaxial
cable to the digital output (SPDIF) of the receiver. For connecting to the Dolby-
Digital device please read its user manual.
Operation
After connecting all devices, you can plug in the mains supplies of all
connected devices and switch them on.
Start Operating The Receiver
16 EN Smart MX 04
Start Operating The Receiver
Switching On The Receiver
After connecting the receiver (see page 14), you can switch it on with the
switch at the rear side.
You can see "Strt" for start on the display of the receiver. On the TV screen
you find a selection of available languages.
Figure 5: Selection of language after first startup
Select your language with the PR (+/-) buttons and confirm with OK.
Operating At The Front Panel
Smart MX 04 EN 17
Operating At The Front Panel
Figure 6: Front side of the receiver
At the rear side of the receiver is the main supply switch. Here you should
switch the device off if it will not be used for longer time. Here you also have to
switch the device on afterwards.
With the On/Off switch at the front side you can switch your receiver to the
stand
by mode. If the receiver is in the standby mode, press the On/Off switch
to s
witch the receiver on.
On the display you can see the actual channel number.
For selecting the channels upwards press PR , for
selecting the channels
downwards press PR .
Navigation In The Menus
18 EN Smart MX 04
Navigation In The Menus
Note!
A menu is a text field, which will be displayed on the screen.
Selectable options are marked with color. Not marked options
cannot be changed or selected. Most options in the menus are
explained on the bottom of the screen.
With the PR (+/-) and VOL (+/-) buttons you can navigate through the menu.
After marking the selected option you can confirm your selection with the
OK button.
W
ith pressing the EXIT button you can leave the menu and come to the
p
revious mode.
Insert Code
To protect some settings against unauthorized access and changes, they are
only accessible after inserting a code. When selecting one of these menus,
you will be asked to enter the code.
Note!
The default code is 0000.
You can change the code at any time (see chapter Channel Lock on page 39).
Edit Channel
Smart MX 04 EN 19
Edit Channel
Ö Press MENU on the remote control.
Ö Select the menu point Edit Channel.
Ö
To confirm press OK.
Ö
Insert your code.
TV Channel List
Select the menu point Edit Channel in the main menu.
Ö Select TV Channel List.
Ö To confirm press OK.
Ö
To leave the menu, press EXIT.
Figure 7: TV Channel List
Ö Select the satellite which channel list should be shown with VOL (+/-).
Ö
Select the channel which you want to edit with PR (+/-).
FAV
Ö Press FAV to add the marked channel to the favorite s list.
Ö Press the OK button.
Ö Selec
t with PR (+/-) the favorite list for the selected channel. Confirm with
the OK button.
Edit Channel
20 EN Smart MX 04
Locking
Ö Press Find to lock channels.
Ö Select the channel, which should be locked, with the PR (+/-) buttons.
Ö Press
the OK button to lock the selected channel.
Skip
Ö Press ZOOM to skip channels in the channel list.
Ö Select the channel which should be skipped with PR (+/-).
Ö
To confirm press OK.
Move
Ö Press TXT to move channel to another place in the list.
Ö Select the channel which should be moved.
Ö Press the OK button.
Ö
Move the selected channel with PR (+/-) to the new position.
Ö Press
the OK button to store the channel at the new position.
Change
Sort
Ö Press Audio to change the channel list. Then press Find to get an
overview
about the sorting mode. Select a sorting mode with PR (+/-) and
confirm with the OK button.
Change
Ö Press
Audio to change the channel list.
Ö Press
ZOOM to change the channel name.
Ö
To confirm press OK.
Ö
Insert the new name with the Numeric buttons (0~9). Just like on mobile
phon
es, every numeric button has also some alphanumeric functions. With
pressing several times on the same button you can select the letters with
are printed on top of the Numeric buttons (0~9) of the remote control.
Ö Press
the VOL (+/-) buttons to move to the left or right in the input field. To
add a l
etter, press first the VOL-+ button. Then press the numeric button
for the desired letter.
Edit Channel
Smart MX 04 EN 21
Note!
Press Find to switch between small and capital letters. You
can see on the letters ABC on top of the input panel which
spelling is active.
Press ZOOM for deleting a figure or letter.
Press
TXT to finish the input and show the entered channel.
Press
Audio or EXIT to exit the dialog box.
Ö For leaving the menu, press EXIT once or repeatedly.
Delete
Ö Press
Audio to change the channel list.
Ö Press
Audio again to delete a channel.
Ö Selec
t with PR (+/-) the channel which you want to delete.
Ö
To confirm press OK.
Radio Channel List
To select the radio channel list, go to the menu Edit Channel, see page 19.
Ö Select the menu point Radio channel list.
Ö To confirm press OK.
Ö
All further functions are the same as for the TV channel list. Please look
under Edit Channel, p
age 19 .
Ö For leaving the menu, press EXIT once or repeatedly.
Delete All
To delete all radio channels, go to the menu Edit Channel, see page 19.
Ö Select the point Delete All.
Ö To confirm press OK.
Ö Selec
t Yes if you really want to delete all channels.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Installation
24 EN Smart MX 04
Delete All
To delete the saved satellite positions, go to the menu Installation on
page 22. This menu point is only active when antenna setup is set on
DiSEqC 1.2 (see
chapter Motor Type, page 23).
Ö
Select the menu point Antenna Setup.
Ö To confirm press OK.
Ö
Select the menu point Delete all.
Ö To confirm press OK.
Ö
If you really want to delete all settings, select Yes and confirm with the
OK button.
Ö
If you do not want to delete the settings, select No press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Motor Setting
To change the motor settings, go to the menu Installation on page 22.
Ö Select the menu point Antenna Setup.
Ö To confirm press OK.
Ö
Select the menu point Motor Setting.
Ö To confirm press OK.
At the bottom
of the menu you can see two progress bars for signal strength
and signal quality.
Satellite
Ö
Select the menu point Satellite.
Ö To confirm press OK.
Ö
Select the satellite which position you want to setup.
Ö To confirm press OK.
Transponder
Ö
Select the menu point Transponder.
Ö To confirm press OK.
Ö
Select a transponder.
Ö To confirm press OK.
Pos.No. & Save
Ö
Select the menu point Pos.No. & Save.
Ö Select a position number.
Installation
Smart MX 04 EN 25
Go To X
Ö Select the menu point go to X.
Ö To confirm press OK.
Ö
Select a position.
Ö To confirm press OK.
Save
Ö
Select the menu point Save.
Ö Change the setting of the satellite antenna with the VOL (+/-) buttons
Ö
Safe your changes with the OK button.
Ö
If you want to safe the new settings, then select Yes and confirm with the
OK button.
Ö Ot
herwise select No and confirm with the OK button.
Recalculation
Ö
Select the menu point Recalculation.
Ö To confirm press OK.
Ö
If you want to have all satellite positions recalculated, then select Yes and
confirm with the OK button.
Ö Ot
herwise select No and confirm with the OK button.
Limit Setup
To setup or change the limits for the slewable satellite antenna, go to the
menu Installation o
n page 22.
Ö Select the menu point Antenna Setup.
Ö To confirm press OK.
Ö
Select the menu point Limit Setup.
Ö To confirm press OK.
Limit Setup
Ö
Select the menu point Limit Setup.
Ö Select the limit of the position.
You can select following points:
Disable Limit
West Limit
East Limit
Installation
26 EN Smart MX 04
Limit Setup
Ö Select the menu point Limit Setup.
Ö Change the limit with the VOL (+/-) buttons.
Go To Reference
Ö
Select the menu point Go to reference.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Single Satellite Search
To search channels on a satellite, go to the menu Installation on page 22.
Ö Select the menu point Single Satellite Search.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Satellite
Ö Select in menu Single Satellite Search the menu point Satellite.
Ö To confirm press OK.
Ö
Select a Satellite from the list.
Ö To confirm press OK.
Scan Channel
Ö Select the menu point Scan Channel in menu Single Satellite Search.
Ö If you only want to search for TV channels, then select TV Channels.
Ö If you want to search for radio channels, then select Radio.
Ö If you want to search for TV and radio channels, then select TV + Radio.
Installation
Smart MX 04 EN 27
Network Search
Ö Select the menu point Network Search in menu Single Satellite Search
on page 26. This menu point is only active when you have selected
Preset Sc
an.
Ö If you want to search with network search, then select Yes.
Ö Otherwise select No.
Scan Mode
Ö Select the menu point Scan Mode in menu Single Satellite Search on
page 26.
Ö
Select the search mode Preset Scan or Blind Search.
Search
Ö Select the menu point Search in menu Single Satellite Search on
page 26.
Ö Press
OK to start the search run.
Multi Satellite Search
To search channels on several satellites, go to the menu Installation on
page 22.
Ö
Select the menu point Multi Satellite Search.
Ö Confirm
with OK. At the bottom of the menu you can see the satellites on
whi
ch the channels will be searched.
Ö For leaving the menu, press EXIT once or repeatedly.
Satellite
Ö Select the menu point Satellite in menu Multi Satellite Search.
Ö To confirm press OK.
Ö
Select a satellite from the list.
Ö To confirm press OK.
Scan Channel
Ö Select the menu point Scan Channel in menu Multi Satellite Search on
page 27.
Ö
If you only want to search for TV channels, then select TV Channels.
Ö If you want to search for radio channels, then select Radio.
Ö If you want to search for TV and radio channels, then select TV + Radio.
Installation
28 EN Smart MX 04
Network Search
Ö Select the menu point Network Search in menu Multi Satellite Search
on page 27. This menu point is only active when you have selected
Preset Sc
an.
Ö If you want to search with network search, then select Yes.
Ö Otherwise select No.
Scan Mode
Ö Select the menu point Scan Mode in menu Multi Satellite Search on
page 27.
Ö
Select the search mode Preset Scan or Blind Search.
Search
Ö Select the menu point Search in menu Multi Satellite Search on page 27
Ö Press OK to start the search run.
TP List
To select the transponder list, go to the menu Installation on page 22.
Ö Select the menu point TP List.
Ö To confirm press OK.
Ö
To edit the TP List, press Find.
Ö
To add a transponder, press ZOOM.
Ö
To delete a transponder, press TXT.
Ö
To search a transponder, press Audio.
Ö
For leaving the menu, press EXIT once or repeatedly.
System Setup
Smart MX 04 EN 29
System Setup
Ö Press MENU.
Ö Select the menu point System Setup.
Ö
To confirm press OK.
Language
Figure 8: menu for language settings
Language
The menu language is set when the receiver was stared for the first time (see
chapter Start Operating The Receiver,
page 16).
To change the menu language, go to the menu System Setup.
Ö
Select the menu point Language.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the desired language.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
System Setup
30 EN Smart MX 04
First Audio
To change the first audio language, go to the menu System Setup on
page 29.
Ö
Select the menu point Language.
Ö To confirm press OK.
Ö
Select the menu point First Audio.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the desired language.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Second Audio
To change the second audio language, go to the menu System Setup on
page 29.
Ö
Select the menu point Language.
Ö To confirm press OK.
Ö
Select the menu point Second Audio.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the desired language.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Subtitle Language
To change the language of the subtitle, go to the menu System Setup on
page 29.
Ö
Select the menu point Language.
Ö To confirm press OK.
Ö
Select the menu point Subtitle Language.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the desired language.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
System Setup
Smart MX 04 EN 31
Teletext
To change the language of the teletext, go to the menu System Setup on
page 29.
Ö
Select the menu point Language.
Ö To confirm press OK.
Ö
Select the menu point Teletext.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the desired Ianguage.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
TV System
Figure 9: menu for TV System
Display Mode
To change the color TV norm, go to the menu System Setup on page 29.
Ö Select the menu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point Display Mode.
Ö To confirm press OK.
System Setup
32 EN Smart MX 04
Ö Select the adequate color TV norm for your system with the VOL (+/-)
buttons.
To be available are following norms
PAL
PAL-M
PAL-N
NTSC
Auto
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Aspect Mode
To change the screen format, go to the menu System Setup - see on
page 29.
Ö
Select the menu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point Aspect Mode.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the adequate screen format for
your TV-Set.
To be available are:
4:3 PanScan
4:3 Letter Box
16:9
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Video Output
To change the format of the video signal, go to the menu System Setup – see
on page 29.
Ö
Select the menu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point Video Output.
Ö Select the video output format with VOL (+/-).
To be availab
le are:
RGB
CVBS
System Setup
Smart MX 04 EN 33
Ö To confirm press OK.
Ö For leaving the menu, press EXIT once or repeatedly.
RF System (only for Receivers with Modulator)
To change the color TV norm of the modulator, go to the menu System Setup
– see on page 29.
Ö
Select the menu point TV System.
Ö To confirm press OK.
Ö
Select the menu point RF System.
Ö To confirm press OK.
Ö
Select the norm for the modulator with VOL (+/-).
To be availab
le are:
PAL-BG
PAL-I
PAL-DK
NTSC
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
RF Channel (only for Receivers with Modulator)
To change the output channel of the modulator, go to the menu System
Setup – see on page 29.
Select the me
nu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point RF Channel.
Ö To confirm press OK.
Ö
Select the output channel for the modulator. Default setting is the
RF channel 38.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
System Setup
34 EN Smart MX 04
Local Time Setting
GMT Usage
To change the time setting, go to the menu System Setup – see on page 29.
Ö Select the menu point Local Time Settings.
Ö To confirm press OK.
Ö
Select the menu point GMT Usage.
Ö Select On if the time setting should be automatically.
Ö Select Off if you want to set or change the time manually.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
GMT Offset
To choose the time zone, go to the menu System Setup – see on page 29.
Ö Select the menu point Local Time Settings.
Ö To confirm press OK.
Ö
Select the menu point GMT Offset.
Ö To confirm press OK.
Ö
Select the time zone for your location.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Summertime
To select the summertime, go to the menu System Setup – see on page 29.
Ö Select the menu point Local Time Settings.
Ö To confirm press OK.
Ö
Select the menu point Summertime.
Ö Select On when time is just summertime.
Ö Select Off in wintertime.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Date
To set the date, go to the menu System Setup – see on page 29.
Ö Select the menu point Local Time Settings.
Ö To confirm press OK.
System Setup
Smart MX 04 EN 35
Ö Select the menu point Date.
Ö Insert the date with the Numeric buttons (0~9).
Ö
For leaving the menu, press EXIT once or repeatedly.
Time
To set the time, go to the menu System Setup – see on page 29.
Ö Select the menu point Local Time Settings.
Ö To confirm press OK.
Ö
Select the menu point Time.
Ö Insert the time with the Numeric buttons (0~9).
Ö
For leaving the menu, press EXIT once or repeatedly.
Timer Setting
To change the timer settings, go to the menu System Setup – see on
page 29.
Ö
Select the menu point Timer setting.
Ö To confirm press OK.
Ö
Select the timer which you want to program or which you want to change.
Ö To confirm press OK.
Timer Mode
To set the timer repetition, go to the menu System Setup – see on page 29.
Ö Select the menu point Timer Settings.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.
Ö To confirm press OK.
Ö
Select the menu point Timer Mode.
Ö Select the frequency of repetition.
To be available are following settings:
off
once
daily
weekly
monthly
yearly
Ö Go to Save to safe your settings and press the OK button.
System Setup
38 EN Smart MX 04
Ö To confirm press OK.
Ö Select the menu point On Time.
Ö Insert the time.
Ö Go to Save to safe your settings and press the OK button.
Ö Go
to Cancel for not saving the settings and press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Duration
To select the duration, go to the menu System Setup – see on page 29.
Ö Select the menu point Timer Settings.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.
Ö To confirm press OK.
Ö
Select the menu point Duration.
Ö Insert the duration.
Ö Go to Save to safe your settings and press the OK button.
Ö Go
to Cancel for not saving the settings and press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Parental Lock
Figure 10: menu for setting the parental lock
System Setup
Smart MX 04 EN 39
To change the setting of Parental Lock, go to the menu System Setup – see
on page 29.
Ö
Select the menu point Parental Lock.
Ö To confirm press OK.
Ö
Insert the code (see page 18).
Ö
For leaving the menu, press EXIT once or repeatedly.
Menu Lock
Ö Select the menu point Menu Lock in the menu Parental Lock.
Ö Select On if you want to lock some menus.
Ö Select Off if all settings shall be free accessible. Only exception: the menu
Parental Lock can only be opened after inserting the code.
Ö For leaving the menu, press EXIT once or repeatedly.
Channel Lock
Ö Select the menu point Channel Lock in the menu Parental Lock.
Ö Select On if you want to lock some channels.
Ö Select Off if all settings shall be free accessible. Only exception: the menu
Parental Lock can only be opened after inserting the code.
Ö For leaving the menu, press EXIT once or repeatedly.
New Password
Ö Select the menu point New Password in the menu Parental Lock.
Ö Insert a new code with the Numeric buttons (0~9).
Ö
Repeat the new code under confirm password.
Ö You will see the message Change password successfully! Confirm the
new code with the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Note!
When the new code is inserted and confirmed, there is no
possibility to revoke or cancel the code change.
System Setup
40 EN Smart MX 04
OSD Setting
Figure 11: menu for OSD Setting
To change the settings of the OSD, go to the menu System Setup – see on
page 29.
Ö
Select the menu point OSD Setting.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Subtitle Display
Ö Select the menu point Subtitle Display in the menu OSD Setting.
Ö Select on to show the subtitles.
Ö Select off to hide the subtitles.
Ö For leaving the menu, press EXIT once or repeatedly.
OSD Timeout
Ö Select the menu point OSD Timeout in the menu OSD Setting.
Ö To confirm press OK.
Ö
Select the time how long the menu shall be displayed. The minimum is
1 second and the maximum is 10 seconds.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
System Setup
Smart MX 04 EN 41
OSD Transparency
Ö Select the menu point OSD Transparency in the menu OSD Setting.
Ö To confirm press OK.
Ö
Select the value for die transparency.
To be available are following grades:
Off
10%
20%
30%
40%
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Favorite
Figure 12: change name of favorite list
To change the names of the favorite lists, go to the menu System Setup
see o
n page 29.
Ö
Select the menu point Favorites.
Ö To confirm press OK.
Ö
Select the favorite list supposed to be changed.
Technical Specifications
Smart MX 04 EN 69
Technical Specifications
LNB / Tuner-Input
F-type connector IEC 169-24
Frequency Range 950 MHz ~ 2150 MHz
Input Level -65 dBm to -25 dBm
LNB Power Supply 13/18 V, max. 400 mA
LNB Control Signal 22 kHz, 0/12 V
DiSEqC Control Version 1.2
Demodulator
Front
-End-Module QPSK
Input Data Rates 2 MS/s to 45 MS/s
SCPC- and MCPC-compatible
System Resources
Processo
r 32 bit, 60 MHz
SDRAM 8 MByte
FLASH 2 MByte
Video-Decoder
Video Re
solution (Video format) 720 x 576 (PAL), 720 x 480 (NTSC)
Aspect Ratio 4:3, 16:9
Modulator (optional)
Cha
nnel 21 - 69
Remote Control
Batteries
2x type AAA
Range max. 7 m
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smart MX 04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smart MX 04 in the language / languages: English as an attachment in your email.

The manual is 5,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Smart MX 04

Smart MX 04 User Manual - German - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info