566155
189
Zoom out
Zoom in
Previous page
1/224
Next page
X
Removing: Fold the wiper arm away from
the rear window until you feel it engage.
X
Fold wiper blade : away from the wiper
arm in direction of arrow ; until it
disengages from its mounting.
X
Detach wiper blade :.
X
Installing: Push the new wiper blade onto
the wiper arm until you feel it engage.
X
Fold the wiper blade into a position par-
allel to the wiper arm.
X
Fold the wiper arm backward to rest on
the rear window.
Make sure to hold on to the wiper when
folding the wiper arm back.
!
Make sure the wiper blade is properly
installed. An improperly installed
wiper blade may cause rear window dam-
age.
Adjusting the washer jet nozzles
:
Front washer jet nozzles
;
Rear washer jet nozzles
X
Adjusting: Use a needle to move washer
jet nozzles : or ; left, right, up, or
down.
i
Check the setting of the washer jet noz-
zles at regular intervals. The washer jet
nozzles are correctly set when the water
jet hits the windshield or the rear win-
dow approximately in the center.
Flat tire
Preparing the vehicle
Upon experiencing any type of problem
with the vehicle’s tires, switch on the haz-
ard warning flasher, carefully slow down
and exit the roadway in a cautious manner.
X
Park the vehicle at a safe distance from
moving traffic on a hard, flat surface
when possible.
X
Make sure the tire valve of the damaged
tire is located below the horizontal axle
of the wheel hub.
X
Engage the parking brake.
X
Turn the steering wheel so that the front
wheels are in a straight ahead position.
X
Move the gear selector lever to park
position P.
X
Switch off the drive system.
X
Remove the key from the starter switch
and take the key with you.
i
Open door only when conditions are safe
to do so.
X
Have any passenger exit the vehicle at a
safe distance from the roadway.
Using the tire repair kit
!
Depending on the type of damage on the
tire, the tire sealant could damage the
sensor of the Tire Pressure Monitoring
System (TPMS)*. Such damage is not cov-
ered by the smart Limited Warranty.
When having the damaged tire replaced,
also have the TPMS sensors* checked for
proper function. When the sensor is dam-
aged, the TPMS* will not function prop-
erly. The sensor must then be replaced at
an authorized electric drive smart
center as soon as possible.
i
Depending on production date of your
vehicle, it will be equipped with version
1 or version 2 of the tire repair kit.
Please make sure to refer to the descrip-
Flat tire
187
>> Practical hints.
* optional
Z
189


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smart For two Electric-Drive 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smart For two Electric-Drive 2014 in the language / languages: English as an attachment in your email.

The manual is 29,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info