566178
18
Zoom out
Zoom in
Previous page
1/220
Next page
For safety reasons, smart recommends all
work to be carried out by a smart service
partner which is qualified for smart
electric drive.
Particular care should be taken involving
all areas which are in the vicinity of high
voltage parts, e.g. parts in the engine
compartment. Orange-colored cables and
their
respective sockets carry high voltage
and must not be damaged.
Serious injury or death can result if you:
R
remove the covers of components which
are labeled with a warning sticker.
R
handle components of the high-voltage
vehicle electrical system.
R
open the housing.
R
disconnect plug connectors.
R
come into contact with components or
orange-colored cables of the high-
voltage vehicle electrical system
following an accident.
R
come into contact with orange-colored
cables or their damaged plug connectors.
R
come into contact with damaged
components of the high-voltage vehicle
electrical system.
Have the damaged orange-colored cables or
their damaged plug connectors replaced
immediately at an authorized electric
drive smart center. The service partner
must have the required knowledge and tools
to carry out the necessary work. For safety
reasons, smart recommends using a smart
center which is qualified for smart
electric drive. Particularly for safety-
relevant work and work on safety-relevant
vehicle systems, servicing by an
authorized electric drive smart center is
essential.
Do not remove the high-voltage battery of
the high-voltage vehicle electrical
system. Have the required work carried out
by an authorized electric drive smart
center. smart recommends that you use an
authorized electric drive smart center.
G
WARNING
The high‑voltage battery of the drive
system is located under the vehicle’s
underbody. When the pressure inside the
high‑voltage battery exceeds a certain
value,
for example in case of a vehicle fire,
inflammable gas will escape via a duct. The
inflammable gas escapes to an area under
the vehicle. This prevents the high‑voltage
battery from exploding.
Stay away from this area of the vehicle.
Automatic switch-off of the high-
voltage system
The high-voltage system will be
automatically switched off, in the event:
R
of an accident in which the restraint
systems are triggered
R
of a short circuit in the high-voltage
system is detected
R
that an electric connection in the high-
voltage system has been disconnected
This helps to avoid that you get in contact
with high-voltage.
High-voltage battery
G
WARNING
The high‑voltage battery of the drive
system is located under the vehicle’s
underbody. When the pressure inside the
high‑voltage battery exceeds a certain
value,
for example in case of a vehicle fire,
inflammable gas will escape via a duct. The
inflammable gas escapes to an area under
the vehicle. This prevents the high‑voltage
battery from exploding.
Stay away from this area of the vehicle.
16
>> Introduction.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smart For two Electric-Drive 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smart For two Electric-Drive 2013 in the language / languages: English as an attachment in your email.

The manual is 11,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info