such retrofits approved. smart approves
the installation of telephones and radio
devices if the work is done professionally
and the device is connected to a low-
reflection exterior antenna.
The transmitting power of the telephone or
radio must not exceed the following
maximum values.
Frequency range
(band)
Maximum
transmitting
power (Watts)
Short wave
(<50 MHz)
100
2 m wavelength 50
0.7 mwavelength 35
0.25 m wavelength 10
G
WARNING
Radio transmitters can interfere with the
vehicle’s electronic system, endanger the
operating safety of the vehicle and thus
your own safety, if
R
there is no external antenna
R
the external antenna is not low-
reflection
R
the external antenna is incorrectly
installed
Excessive electromagnetic radiation can
damage your health and that of others.
Using an external antenna addresses and
considers the concerns currently being
discussed in scientific circles about the
health hazards possibly posed by
electromagnetic fields.
Because of this, have the external antenna
installed exclusively at a qualified
specialist workshop which has the
necessary specialist knowledge and tools
to carry out the work required, e.g. at a
smart center. In particular, work relevant
to safety or on safety-related systems must
be carried out at a qualified specialist
workshop.
On-board Diagnostics Socket (OBD)
The on-board diagnostics socket is located
inside the vehicle on the right side of the
left footwell.
:
On-board diagnostics socket
Identification labels
Signs and labels
:
Air bag information signs
(sun visor)
;
VIN (engine compartment)
=
Emission control information label,
includes both federal and California
certification exhaust emission
standards (engine compartment)
Identification labels
213
>> Technical data.
Z
