566138
184
Zoom out
Zoom in
Previous page
1/228
Next page
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
X
Turn the exterior lamp switch to position
$ (Y page 64).
X
Switch off the ignition.
X
Open the service flap (Y page 120).
Left headlamp, (right headlamp in reverse)
Parking and side marker lamp bulb
X
Removing:
Driver’s side: Turn bulb socket ? toward
the outside.
Passenger side: Turn bulb socket ?
toward the outside.
X
Pull bulb socket ? out of the headlamp
housing.
X
Pull the bulb out of bulb socket ?.
X
Installing: Insert the new bulb into bulb
socket ?.
X
Insert bulb socket ? into the headlamp
housing.
X
Driver side: Turn bulb socket ? toward
the inside.
Passenger side: Turn bulb socket ?
toward the inside.
Low‑beam headlamp bulb
X
Removing: Take off low‑beam headlamp
cover =.
X
Detach the electrical connector.
X
Bend the retainer spring end down and
forward until it unclips.Fold the
retainer spring back.
X
Pull the bulb out of the headlamp
housing.
X
Installing: Insert the new bulb into the
headlamp housing.
X
Fold the retainer spring forward.
X
Bend the retainer spring end forward
then up and back to clip in.
X
Attach the electrical connector.
X
Reinstall low‑beam headlamp cover =.
High‑beam headlamp bulb
X
Removing: Take off high‑beam headlamp
cover ;.
X
Detach the electrical connector.
X
Tilt the bulb socket down and pull it out.
X
Pull the bulb out of the bulb socket.
X
Installing: Insert the new bulb into the
bulb socket.
X
Fit the bulb so that the retaining lug of
the base plate is pointing up.
X
Press the bulb into the bulb socket until
it is fully engaged.
X
Attach the electrical connector.
X
Reinstall high‑beam headlamp cover ;.
Front turn signal lamp bulb
X
Removing: Turn bulb socket :
counterclockwise by aquarter of turn and
pull it out of the headlamp housing.
X
Press gently onto the bulb and turn it
counterclockwise.
X
Pull the bulb out of bulb socket :.
X
Installing: Insert the new bulb into bulb
socket :.
X
Press gently onto the bulb and turn it
clockwise.
X
Insert bulb socket : into the headlamp
housing.
Replacing bulbs
181
>> Practical hints.
Z
184


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Smart for two 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Smart for two 2013 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info