Manual Smanos WK8000 (page 12 of 105) (English, German, Dutch, French, Italian, Portuguese, Spanish)

647209

Zoom out

Zoom in

1/105

ENEN

19 20

Reset

After reset,both user code and admin code and other settings will

be restored to default but the connected RFID tags are still valid.

Enter setup state, input:

When one beep is heard and the LED indicator keeps on for

10 seconds, the setup is successful.

Usage

The keypad can be used as a remote control. User code or admin

code should be input before the operation of Arm, Disarm, Stay

Mode, and Mute Mode.

Arm

Using keypad to arm

Input user code or admin code, and press key, the LED

indicator ashes once and the keypad beeps once and sends arm

signal to the control panel.

When the alarm panel receives the signal, the siren will beep once.

The alarm system enters armed state.

Using RFID Tag to Arm

If direct arm is enabled,just tap the RFID tag twice within 3

seconds on the keypad to arm the system.

If direct arm is disabled,user needs to press [*]to wake up the

keypad and then tap RFID tag twice within 3 seconds on the

keypad to arm the system.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smanos WK8000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 19,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smanos WK8000 Manual

Product: