Manual Smanos WK8000 (page 6 of 105) (English, German, Dutch, French, Italian, Portuguese, Spanish)

647209

Zoom out

Zoom in

1/105

ENEN

7 8

2. Press [9], one beep is heard and the LED indicator is on. Keypad

enters learning state.

3. Tap the RFID tag on the reader RFID reader, the connection

succeeds after one beep and the LED indicator goes out.

If two beeps are heard, it indicates the RFID tag has been connected before.

To clear the connection of all RFID tags, input [admin code + #] to wake up the

keypad and then press down [9] for six seconds. All connected RFID tags will be

deleted.

Installation

Before using the keypad to control the system, you have to install

it to the doorframe or on the wall.

Step 1, slide the cover of the RFID reader gently, loose four small

screws, open the lid of the battery compartment.

Step 2, loose the big screw on the right of the tamper until the

back bracket is out.

Step 3, x the bracket to the target place with the screws, please

notice the direction ( mark upwards).

Step 4, aim the keypad to the bracket, tighten it with screws,

gently lid the RFID reader cover at last.

Note: Opening the lid of the battery compartment will trigger tamper switch,

please disarm the alarm by following the disarm instruction in page 21~22.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Smanos WK8000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 19,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Smanos WK8000 Manual

Product: