496102
48
Zoom out
Zoom in
Previous page
1/93
Next page
5 Operation SMA Solar Technology AG
48 SDesign-BA-BEN120432 User Manual
Enter temperatures
Apply the settings in the "Temperatures" area:
Select the desired temperature type:
Use the slider to set the maximum temperature or enter it directly into the "Record High
Temperature" field.
Use the slider to set the minimum temperature or enter it directly into the "Record Low
Temperature" field. Thereby, the minimum temperature value must be lower than the value of
the average high temperature.
Use the slider to set the average high temperature or enter it directly into the "Average High
Temperature" field.
If necessary: configure advanced settings (only for Germany)
The advanced settings are only for PV plants in Germany.
•In the "Advanced settings" area, activate the check-boxes of the desired tests:
If the design should be checked for conformity with the standard VDE‐AR‐N 4105, activate
the check-box "Please take VDE-AR-N 4105 into consideration".
If the design should be checked for conformity with the Renewable Energy Sources Act
(EEG) 2012, activate the check-box "Consider Renewable Energy Sources Act (EEG)
2012".
Select the check-boxes "Consider Renewable Energy Sources Act (EEG) 2012" and
"Use 70% limits (plants < 30 kWp)" if, in a plant with a maximum installed power of 30 kWp,
the maximum active power feed-in is to be limited to 70% of the installed power.
In the information area in the "Project overview" area, the active power ratio is displayed.
The nominal power ratio is limited to 70 %. On the [PV plant] page, the field "Limitation of
AC active power" is displayed in the inverter tab.
If necessary: enter comment
The comment is also displayed in the project documentation "Project overview" if you activate "Project
overview" in the print wizard.
•In the "Comment" area, enter comments on the project.
Temperature type Explanation
"Cell temperature" Temperature of PV cells in the PV module
"Ambient temperature"‒
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA SUNNY DESIGN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA SUNNY DESIGN in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA SUNNY DESIGN

SMA SUNNY DESIGN User Manual - German - 95 pages

SMA SUNNY DESIGN User Manual - Dutch - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info