687285
45
Zoom out
Zoom in
Previous page
1/98
Next page
8 Operation
SMA Solar Technology AG
Operating manual SBxx-1AV-41-BE-en-10 45
SSID, IP address and necessary passwords
SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
Standard WLAN password (usable until completion of the configuration by means of the
installation assistant or prior to the end of the first tenfeed-in hours): SMA12345
Device-specific WLAN password (usable for initial configuration to completion of the first
tenfeed-in hours): see WPA2-PSK on the type label of the inverter or on the back of the
manual included in the delivery
Standard IP address for a direct connection via WLAN outside of a local network:
192.168.12.3
Importing and exporting files with end devices having an iOS operating
system is not possible.
For technical reasons, importing and exporting files (e.g. importing an inverter configuration,
saving the current inverter configuration or exporting events and parameters) is not possible
with mobile end devices having an iOS operating system.
Use an end device that does not have an iOS operating system for importing and
exporting files.
The procedure can be different depending on the end devices. If the procedure described does not
apply to your end device, establish the direct connection via WLAN as described in the manual of
your end device.
Procedure:
1. If your end device has a WPS function:
Activate the WPS function on the inverter. To do this, tap on the enclosure lid of the
inverter twice.
The blue LED flashes quickly for approx. two minutes. The WPS function is active
during this time.
Activate the WPS on your end device.
The connection with your end device will be established automatically. It can take
up to 20seconds for this connection to be established.
2. If your end device has not a WPS function:
Search for WLAN networks with your end device.
Select the SSID of the inverter SMA[serial number] in the list with the found WLAN
networks.
Enter the inverter WLAN password. Within the first tenfeed-in hours and prior to
completing the configuration by means of the installation assistant, you must use the
standard WLAN password SMA12345. After the first tenfeed-in hours or after
completing the configuration by means of the installation assistant, you must use the
device-specific WLAN password (WPA2-PSK) of the inverter. You find the WLAN
password (WPA2-PSK) on the type label.
3. Enter the IP address 192.168.12.3 or, if your device supports mDNS services, SMA[serial
number].local or https://SMA[serial number] in the address bar of the web browser and
press the enter key.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 6.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 6.0 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 6.0

SMA Sunny Boy 6.0 Installation Guide - German - 104 pages

SMA Sunny Boy 6.0 User Manual - Dutch - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info