687285
24
Zoom out
Zoom in
Previous page
1/98
Next page
6 Electrical Connection
SMA Solar Technology AG
Operating manualSBxx-1AV-41-BE-en-1024
Safety in accordance with IEC62109 when the grounding conductor
monitoring is deactivated
In order to guarantee safety in accordance with IEC62109 when the grounding conductor
monitoring is deactivated, you have to connect an additional grounding conductor to the
inverter.
Connect an additional grounding conductor that has an cross-section of at least 10mm
(see Section6.2.3, page25). This prevents touch current in the event of the grounding
conductor on the AC connector bush insert failing.
Connection of an additional grounding conductor
In some countries, an additional grounding conductor is generally required. In each case,
observe the locally applicable regulations.
If an additional grounding conductor is required, connect the one that has an cross-
section of at least 10mm (see Section6.2.3, page25). This prevents touch current in
the event of the grounding conductor on the AC connector bush insert failing.
6.2.2 Connecting the Inverter to the Utility Grid
Requirements:
The AC and DC electric circuits are isolated from the enclosure. If required by the National
Electrical Code
®
ANSI/NFPA 70 or Canadian Electrical Code
®
CSA C22.1, the installer is
responsible for grounding the system.
The connection requirements of the grid operator must be met.
The grid voltage must be within the permissible range. The exact operating range of the
inverter is specified in the operating parameters.
Procedure:
1. Disconnect the circuit breaker and secure it against reconnection.
2. Dismantle the AC cable by 50mm.
3. Shorten L1, L2, L3 and N by 8mm each so that the grounding conductor is 8mm longer. This
ensures that the grounding conductor is the last to be pulled from the screw terminal in the
event of tensile strain.
4. Strip the insulation of L1, L2, L3, N and the grounding conductor by 12mm.
5. In the case of fine stranded wire, L1, L2, L3, N and the grounding conductor are to be fitted
with bootlace ferrules.
6. Assemble the AC connector and connect the conductor to the AC connector (see manual of
the AC connector).
7. Ensure that all conductors are securely connected to the AC connector.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 6.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 6.0 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 6.0

SMA Sunny Boy 6.0 Installation Guide - German - 104 pages

SMA Sunny Boy 6.0 User Manual - Dutch - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info