687281
53
Zoom out
Zoom in
Previous page
1/72
Next page
SMA Solar Technology AG 10 Troubleshooting
Installation Manual SB13_21TL-IA-en-65 53
10.4 Checking the ESS for Wear
The ESS is an optional device. Depending on the design of the ESS, you can recognise wear either
on the metal tabs or on the plastic casing of the ESS.
1. Remove the ESS.
2. Check the metal tabs or plastic inside the ESS.
There should be no visible discoloration or damage
on the metal tabs or the plastic.
If the metal tabs show brown discolouration or are
burnt out or the plastic is damaged, the ESS is worn.
This means that the ESS can no longer disconnect the
PV array reliably. Order a new ESS to replace the
damaged one (see Section13 "Accessories",
page65).
5. Commission the inverter (see Section 7.4).
3.
Risk of fire due to tightening of the ESS screw
Perfect contact between the ESS and the inverter can only be guaranteed if the ESS plug
remains flexible.
Do not tighten the screw in the plug of the ESS.
4.
Damage to the inverter due to moisture and dust penetration
If the ESS is not plugged in or incorrectly plugged in during operation, moisture and dust can
penetrate the inverter. If the ESS is not correctly plugged in, the ESS contacts may be subject to
wear, or the ESS may detach from the socket. This can result in yield loss and damage to the
ESS.
Always plug the ESS in as follows:
Firmly plug the ESS in until it is flush with the enclosure.
Ensure that the gap between the ESS and the enclosure is no more than 1 mm.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 2100T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 2100T in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info