687264
58
Zoom out
Zoom in
Previous page
1/92
Next page
8 Operation
SMA Solar Technology AG
Operating manualSBxx-1VL-40-BE-en-1358
5. Select [Save and next] until you get to the step Meter configuration.
6. Add or replace the desired energy meter.
8.16 Setting SMA OptiTrac Global Peak
For partially shaded PV modules, you should set the interval at which the inverter is to optimize the
MPP of the PV system. If you do not want to use SMAOptiTracGlobalPeak feature, you can
deactivate the feature.
The basic procedure for changing operating parameters is explained in another section (see
Section8.9 "Changing Operating Parameters", page54).
Procedure:
In the parameter group DC-side > DC settings > OptiTrac Global Peak, set the parameter
Cycle time of the OptiTrac Global Peak algorithm and set the required time interval. The
ideal time interval is usually six minutes. This value should only be increased if the shading
situation changes extremely slowly.
The inverter optimizes the MPP of the PV system at the predetermined time interval.
In order to deactivate the SMAOptiTracGlobalPeak feature, in the parameter group DC-
side > DC settings > OptiTrac Global Peak, set the parameter OptiTrac Global Peak
switched on to Off.
8.17 Saving the Configuration in a File
You can save the current configuration of the inverter in a file. You can use this file as a data
backup for this inverter and then import this file into this inverter again or another inverter from the
same type or device family to configure the inverter. When saving, only the device parameters will
be saved, not any passwords.
Procedure:
1. Activate the user interface (see Section8.1, page43).
2. Log into the user interface (see Section8.2, page47).
3. Select the menu Device Configuration.
4. Select [Settings].
5. In the context menu, select [Saving the configuration in a file].
6. Follow the instructions in the dialog.
8.18 Adopting a Configuration from a File
To configure the inverter, you can adopt the configuration from a file. To be able to do this, you
must first save the configuration of another inverter from the same type or device family in a file (see
Section8.17 "Saving the Configuration in a File", page58). When saving, only the device
parameters will be adopted, not any passwords.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 2.0 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 2.0

SMA Sunny Boy 2.0 User Manual - German - 98 pages

SMA Sunny Boy 2.0 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info