687264
21
Zoom out
Zoom in
Previous page
1/98
Next page
5 Montage
SMA Solar Technology AG
Betriebsanleitung SBxx-1VL-40-BE-de-13 21
5 Montage
5.1 Voraussetzungen für die Montage
Anforderungen an den Montageort:
WARNUNG
Lebensgefahr durch Feuer oder Explosion
Trotz sorgfältiger Konstruktion kann bei elektrischen Geräten ein Brand entstehen.
Das Produkt nicht in Bereichen montieren, in denen sich leicht entflammbare Stoffe oder
brennbare Gase befinden.
Das Produkt nicht in explosionsgefährdeten Bereichen montieren.
Montage an einem Pfosten ist nicht zulässig.
Fester und ebener Untergrund für die Montage muss vorhanden sein (z. B. Beton oder
Mauerwerk). Die Differenz zwischen den äußeren Befestigungspunkten darf nicht mehr als 5
mm betragen.
Montageort muss sich für Gewicht und Abmessungen des Produkts eignen (siehe Kapitel13
"Technische Daten", Seite89).
Montageort darf keiner direkten Sonneneinstrahlung ausgesetzt sein. Direkte
Sonneneinstrahlung auf das Produkt kann zu einer vorzeitigen Alterung der außenliegenden
Kunststoffteile und zu starker Erwärmung führen. Das Produkt reduziert bei zu starker
Erwärmung seine Leistung, um einer Überhitzung vorzubeugen.
Montageort sollte jederzeit frei und sicher zugänglich sein, ohne dass zusätzliche Hilfsmittel (z.
B. Gerüste oder Hebebühnen) notwendig sind. Andernfalls sind eventuelle Service-Einsätze nur
eingeschränkt möglich.
Der DC-Lasttrennschalter des Produkts muss immer frei zugänglich sein.
Die klimatischen Bedingungen müssen eingehalten sein (siehe Kapitel13, Seite89).
Um einen optimalen Betrieb zu gewährleisten, sollte die Umgebungstemperatur zwischen
-25°C und +40°C liegen.
Zulässige und unzulässige Montagepositionen:
Das Produkt darf nur in einer zulässigen Position montiert werden. Dadurch ist sichergestellt,
dass keine Feuchtigkeit in das Produkt eindringen kann.
Das Produkt sollte so montiert werden, dass Sie die LED-Signale problemlos ablesen können.
15°
Abbildung 3: Zulässige und unzulässige Montagepositionen
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 2.0 in the language / languages: German as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 2.0

SMA Sunny Boy 2.0 User Manual - English - 92 pages

SMA Sunny Boy 2.0 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info