687263
19
Zoom out
Zoom in
Previous page
1/60
Next page
Risk of injury when lifting the inverter, or if it is dropped
The inverter weighs 9kg. There is risk of injury if the inverter is lifted incorrectly or dropped while
being transported or when attaching it to or removing it from the wall mounting bracket.
Transport and lift the inverter carefully.
Procedure:
1.
Risk of injury due to damaged cables
There may be power cables or other supply lines (e.g. gas or water) routed in the wall.
Ensure that no lines are laid in the wall which could be damaged when drilling holes.
2. Mark the position of the drill holes. Use the information on dimensioning given in this
document for this (see Section5.1 "Requirements for Mounting", page16).
3. Ensure that the positions marked are aligned horizontally.
4. Drill the holes at the positions marked.
5. If necessary, plug the screw anchors into the holes.
6. Screw the screws in so that there is still at least 6mm distance between the screw head and
the mounting surface.
7. Hang the inverter onto the screws using the
metal brackets.
8. Tighten the screws hand-tight using a ratchet or box wrench. When doing this you can
compensate for any misalignment of the drill holes by aligning the metal brackets accordingly.
9. Ensure that the inverter is securely in place.
5 Mounting
SMA Solar Technology AG
Operating Manual 19SB15-25-BE-en-10
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 1.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 1.5 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 1.5

SMA Sunny Boy 1.5 User Manual - German - 98 pages

SMA Sunny Boy 1.5 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info