687263
16
Zoom out
Zoom in
Previous page
1/60
Next page
5 Mounting
5.1 Requirements for Mounting
Requirements for the mounting location:
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
Do not mount the inverter in areas containing highly flammable materials or gases.
Do not mount the inverter in a potentially explosive atmosphere.
Do not mount the inverter on a pillar.
A solid support surface must be available for mounting, e.g. concrete or masonry.
The support surface must be even. The difference between the outer anchoring points must not
exceed 5mm.
The mounting location must be suitable for the weight and dimensions of the inverter (see
Section11 "Technical Data", page52).
The mounting location should not be exposed to direct solar irradiation. Direct solar irradiation
can cause the inverter to overheat. As a result, the inverter reduces its power output.
The mounting location should be freely and safely accessible at all times without the need for
any auxiliary equipment (such as scaffolding or lifting platforms). Non-fulfillment of these
criteria may restrict servicing.
To ensure optimum operation, the ambient temperature should be between -25°C and 40°C.
Climatic conditions must be met (see Section11 "Technical Data", page52).
5 Mounting
SMA Solar Technology AG
Operating ManualSB15-25-BE-en-1016
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SMA Sunny Boy 1.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SMA Sunny Boy 1.5 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SMA Sunny Boy 1.5

SMA Sunny Boy 1.5 User Manual - German - 98 pages

SMA Sunny Boy 1.5 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info