499459
15
Zoom out
Zoom in
Previous page
1/28
Next page
1113
NEED MORE HELP?
Go to support.slingmedia.com
TROUBLESHOOTING
1. If the power light is not on:
Disconnect the power cable from both the Slingbox and the electrical outlet and
reconnect them - making sure that they are secure.
2. If the network light is not on:
Disconnect the Ethernet cable from the back of the Slingbox and re-insert it. You
will hear a click when it is fully inserted.
Do the same with the other end of the Ethernet cable, making sure that it is
attached to your router.
Make sure that your router is on the same home network as your Slingbox.
3. If the network light is continuously blinking:
Press and hold the reset button on the back of the Slingbox for 10 seconds. The
lights on the front of the Slingbox quickly flash from left to right, and then flash
slowly. This resets the Slingbox to factory settings. If you've already configured
your Slingbox using SlingPlayer, you'll need to go through the setup assistant again
after you reset your Slingbox.
Turn your router off and back on again. Note: Most routers do not have on/off
switches. You may need to unplug and plug the router back into the electrical
outlet.
4. If the SlingPlayer software does not discover the Slingbox on your network:
Some firewall security software blocks the Slingbox from being recognized on
your home network. If this occurs, you need to change your security
software settings to see the Slingbox as a device on your network.
5. If you don’t see your audio/video source while installing the SlingPlayer software:
Re-check the cable connections between your A / V devices and the Slingbox.
Make sure that the cables are fully inserted into the connectors on the back of the
Slingbox and your A/V devices. The cables should fit snugly.
6. If the SlingPlayer application is not controlling your A/V source:
Make sure the remote control IR cable is fully inserted. Move the IR emitters to a
different location on the front of your cable/satellite box or DVR.
7. If your TV is no longer receiving a signal:
Connect the output of the Slingbox to your TV's inputs. Make sure your TV is set to
the correct input. For example, if your Slingbox is connected to your TV's INPUT 1
jacks, change the input setting to INPUT 1.
Turn your router off and back on again. Note: Most routers do not have on/off
switches. You may need to unplug and plug the router back into the electrical
outlet.
POWERNETWORK
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Slingbox PRO HD SB300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Slingbox PRO HD SB300 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info