544779

Skytronic 651.539 Manual

4
Zoom out
Zoom in
Previous page
1/14
Next page
INSTALLATION
1. Install inverter in a cool, dry and well ventilated area away from any inflammable material.
2. Ensure the DC power cables are as short as possible (<2m) and of suitable size to handle the current
required. This is to minimise any voltage drop when the inverter draws high currents. Remember solid,
secure, clean connections are essential for optimum performance. It is better to use an extension lead in
the 230V circuit than in the 12V circuit.
3. Ground the inverter whenever possible.
Operation
Connect the inverter to the battery (red is positive, black is negative). Make sure that all connections are of
good quality. Switch the inverter on first and the unit to be powered afterwards. Switch off in reverse order.
To operate units with a high start voltage, it might be necessary to switch the unit several times on and off.
Wait a few seconds between every switching.
Protection
All SkyTronic inverters are protected against thermal overload, peak currents and short circuit. This ensures
the unit won’t be damaged when something happens. The unit will switch off automatically to protect the
internal parts.
To prevent switching off, always check if the cooling fan isn’t obstructed, if there is sufficient airflow around
the unit and if it’s connected to the right DC input voltage.
Fuse replacement
ALWAYS disconnect this unit from its power supply before attempting to replace the fuse. Remove the old
fuse from the holder and replace with a fuse with the exact same power rating. Replacement with anything
other than the exact same fuse might cause damage to this unit.
FREQUENTLY ASKED QUESTIONS AND ANSWERS
Measuring AC voltages:
The output wave of the AC inverter is a MODIFIED SINEWAVE. If you choose to measure the AC output
voltage, you must use an TRUE RMS VOLT METER. Using any other type of voltage measuring device will
result in an AC voltage reading that’s up to 20 to 30 volts lower than the rated value.
What battery do I need to run my inverter?
Batteries only have a limited power storage capacity and must be regularly recharged. In a car or on a boat
this is done when the engine is running. If you use a stand-alone battery, you must charge it with a separate
battery charger. To determine de required battery capacity you can divide the power consumption of a unit
by 10 for a 12 V inverter and by 20 for a 24V inverter. Example: You connect a portable TV with a power
consumption of 50W. If you have a 12V inverter, the current consumption is 5Amps and for a 24V system
2.5Amps. Depending on the capacity of the connected battery, you can easily calculate when you have to
recharge the battery. Never fully discharge your battery. It might be definitely damaged.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytronic 651.539 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytronic 651.539 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info