490944
6
Zoom out
Zoom in
Previous page
1/22
Next page
6
3. when you enter into CD work mode.the lamp can light.
4. when you enter into usb work mode,the lamp can light.
5. INPUT TOGGLE SWITCH
Select which source will be live to that channel based on what you have connected to the real
panel input section.In CD1-2 position the internal CD units are active.
6. LED METER
Indicates the master output level.
7. MASTER LEVEL
A djusts master level output signal.
8. CHI1CH2 GAIN CONTROL
Adjusts CH1CH2 level
9. HIGH FADER 1-2
Adjust CH1CH2 equalization of high frequencies.
10. MID FADER 1-2
Adjust CH1CH2 equalization of mid frequencies.
11. LOW FADER 1-2
Adjust CH1CH2 equalization of low frequencies.
12. CUE/MIX/PGM CONTROL
Counter clockwise you will be able to monitor the assigned cue signal.Slowly turning the
control clockwise to the assigned cue signal.Slowly turning the control clockwise to middle
position allows you to monitor CUE MIX with PGM.Moving the control clockwise to the right
allows you to monitor Moving the control clockwise to the right allows you to monitor PGM
output.
13. CUE FOR CH1-2
Selects which source will be live to that channel for CH1CH2.
14. INPUT FADER
Controls individual source levels for CH1-2 in the mix.
15. FADER START
Activation allows you to start the CD players from you crossfader.Travel From left to right will
start the right CD player and pause the left CD player.
16. REPLACEABLE CROSSFADER
Achieves clean segues between the two input channels.Hard left selects channel 1.Hard right
selects channel 2.With the crossfader cen terde,both assigned channels are live.Use the
crossfader for fast and semless segues from one selected channel to the other.
17. AC CORD
Used this cable to connect the AC mains power to the unit..
18. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch
again.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec STX-95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec STX-95 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info