490947

Skytec STC-55 Manual

3
Zoom out
Zoom in
Previous page
1/25
Next page
8.JOG MODE
When the (10) is illuminated the wheel is in SCRATCH mode, you may press the SCRATCH button to exit
SCRATCH mode.
9. When you enter into SCRATCH WORK MODE the lamp can light.
10.When you enter into JOG MODE WORK MODE the lamp can light.
11.FOLDER/TRACK SEARCH
Allows you to navigate through folders or tracks similarly in either USB or CD mode. When
navigating a standard CD turn the rotary to the right to advance the selection or turn the rotary
to the left to decrease the selection.
12.when you enter into SD work mode the lamp can light
13.when you enter into USB work mode the lamp can light
14.USB PORT
Allows the connection of any USB memory stick.
15. 3 IN 1 CARD SLOT
Slot for inserting 3 IN 1 card. The contacts of the card must point downwards. The unit cannot
read cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only supports the MP3
format.
16.USB/SD
To select audio source between USB storage and SD card.
17.PITCH BUTTON
Pitch on/off switch. the adjustment of the pitch potentiometer is available when at pitch on state
and the light is illuminate.
18. INPUT TOGGLE SWITCH – (USB-SD / USB B / Phono-Line)
Selects which source will be live to that channel based on what you have connected to the rear
panel input section. In USB1 or USB or SD1 position the internal USB2 or USB or SD2 units
are active
19.CUE FOR CH1-2
Selects which source will be live to that channel for CH1 &CH2
20. INPUT TOGGLE SWITCH – (USB-SD / USB B / Phono-Line)
Selects which source will be live to that channel based on what you have connected to the rear
panel input section. In USB2 or USB or SD2 position the internal USB1 or USB or SD1 units
are active
21.DISPLAY
LCD Display Indicate the Track/Numbers//Time/Remain/Pitch/Continue/Single.
22.1N BUTTON LOOP SYSTEM)
This button sets the beginning point of the loop and the light is illuminate.
23.OUT BUTTON LOOP BUTTON)
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
24.RELOOP BUTTON(LOOP SYSTEM)
This button is used to start the last saved loop. To finish the loop, press the reloop button.
25.DSP/REVERSE
Push the reverse button to play your track in reverse push the reverse button again to cancel this
feature.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec STC-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec STC-55 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info