Manual Skytec ST120 Mobile Amplifier (page 43 of 49) (English, German, Dutch)

490918

Zoom out

Zoom in

1/49

ST120 Mobile Amplifier 8"

(178.864)

Instruction Manual

Gebruiksaanwijzing

Gebrauchsanleitung

Congratulations on the purchase of this SkyTec Karaoke set.

Please read this manual carefully prior to using the unit.

Warning:

- Read the manual prior to using the unit.

- Keep the manual for future reference.

- Keep the packaging for safer transport in its original packaging

- Prior to the first use, have the unit checked by a qualified person.

- The unit contains voltage carrying parts. DO NOT open the unit.

- Never plug or unplug the unit with wet hands.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualified

technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit

into a mains outlet.

- Repairs have to be carried out by a qualified technician.

- Only connect this unit to an earthed mains outlet of 230Vac/50Hz and 10-16A.

- Do no place the unit near heat sources.

- Don't pull the power cord while you pull out the plug. Hold the plug tightly to pull it out.

- Always unplug the unit during a thunderstorm or when it is not in use.

- If the unit has not been used for a longer period of time, condensation can occur inside

the housing. Please let the unit reach room temperature prior to use.

- To avoid accidents in public premises, the legal requirements must be fulfilled and

instructions/warnings must be adhered to.

- Keep out of the reach of children.

- All volume controls must be set to zero prior to switching the unit on.

- Do not use cleaning sprays for the slider controls. The residues of these spray cause

dust deposits in the controls. If a problem occurs, please consult a specialist.

- Always handle CDs with clean hands. Do not insert a damaged CD.

- Always close the CD tray to keep the laser eye clean.

- Do not clean the unit with chemical solutions. This might damage the finish. Only use a

dry cloth for cleaning.

- This unit is with speaker inside which can cause magnetic field. Keep this unit at least

60cm away from computer or TV.

- This unit is with built-in lead-acid rechargeable battery. Please recharge the battery every

3 months if you are not going to use the unit for a long period of time. Or the battery may

be damaged.

- If the battery is damaged please replace with same specifications battery. And dispose

the damaged battery environment friendly.

- Free from high temperature. Don't expose the device to the hot equipment.

- Don't place the device in the environment of humidity and dirt’s.

- Place the device in the ventilated environment.

- Pull out the AC power if you will not use the device for a long time.

Notes:

Since this machine is controlled by the built-in microcomputer, if the function button cannot work

or appears error or no-indication due to thunder and lighting, static or other disturbance, such

situation doesn't belong to trouble. The solution is to turn off the power for more than the power

for more than several seconds, then turn on the switch to recover it.

FEATURES

• One 3.5mm AUX input can be connected

to a computer or MP3 player or other such

sounds source.

• With DVD player, can play DVD & CD

• With USB port and SD/MMC card slot

which can connect flash drive,MP3

player,SD/MMC card to play MP3 music.

• Built-in 1×12V/12A rechargeable battery

• Built-in two channels wireless microphone

and one 6.35mm MIC input jack to

connect wired dynamic MIC. Three

persons can speak or sing at the same

time.

• One RCA line input can be connected to

CD player or other such sound source.

• One 6.35mm guitar input can be

connected to guitar.

• MIC Echo/Tone/Volume and music

Bass/Treble/Volume controls. Suitable for

karaoke.

• Powered externally with AC,DC 12V or

internally with built-in rechargeable battery.

Suitable for both indoor and outdoor use.

• Ideal for many applications, including use

in classrooms, conference / meeting

rooms, churches, health clubs and small

auditoriums.

PARTS DESCRIPTION

ST120 Front Pane introduction

1. Power indicate light

2. Low power indicate

3. DVD/FM/LINE

4. Automatically search

5. Prevous button

6. Next button

7. Tray door

8. Playback/pause

9. Open/close

10. Full charge

11. Charging

12. Guitar input

13. Wired microphone inputs

14. Master volume

15. Wired microphone volume

16. Wireless microphone indicator

17. Power switch

18. Wireless microphone indicator

19. Wireless microphone volume

20. Display screen

21. SD

22. USB

23. Echo

24. Microphone treble

25. Microphone bass

ST120 Back Pane introduction

1. Wireless microphone antenna

2. Power input socket

3. Green color difference

4. Front right

5. Blue color difference

6. Front left

7. Red color difference

8. Coaxial digital output

9. Video output

10. S-video terminal

11. Optical output

12. Wireless MIC/FM antenna

13. Fan

14. Outdoor battery input

15. Outdoor speaker box terminal

16. Outdoor sound source input terminal

System connection

CAUTION

(This player has no inside DTS decoder, if you play the disc with pure DTS, Analog output

terminal of the player will has no sound, you must press the setup key on the remote controller

to select audio for SPDIF/SOURCE Code, then recover sound by digital decode power amplifier

or digital decoder; if you play the disc with two format for DTS or Dolby AC-3, when there is no

sound output, you can press language key to convert to Dolby status).

Before finishing the connection, please do not pull on power plug.

Connection with TV set (AV input)

There is one set of AV cable in the standard packing

• Connect the AV output terminal of this player with AV input terminal of Tv set (Video:

yellow jack)

• Connect the mix audio output terminal of this player with audio input terminal of TV set

(left sound channel: white, and right sound channel: red)

• Please refer to the relevant TV use manual when connecting.

• When there is no AV port on your TV, please connect the outdoor radio frequency box

with this player's RF interface and TV antenna build-in end. And you can adjust the

channel and frequency rangelo make sure the image and voice to reach the best state.

• When you are watching the disc in the different mode, please adjust this DVD player into

the relevant mode (PAL, PAL60, NTSC and AUTO)

S-Video terminal connected to TV set

• The S-video connection line is the optional item, not including in the standard packing of

the DVD player.

• Once the TV set available for S-video input, please connect the S-video output with the

S-video input terminal via the terminal cable for the belter quality of picture.

• Connect the mix audio output terminal of this player with audio input terminal of TV set

(left sound channel:white,and right sound channel:red),when connecting, Please refer to

the relevant TV manual.

Connection with the TV of color differential signal input

• The color differential connection line is the optional item,not including in the standard

packing of the DVD player

• Once the TV set available for color deferential video input, please connect the color

deferential video output with the color deferential video input terminal( Y.Pb/Cb.Pr/Cr),

via the terminal cable for the better quality of picture.

• Connect the mix audio output terminal of this player with audio input terminal of TV set

(left sound channel: white, and right sound channel: red),when connecting, Please refer

to the relevant TV manual.

Connection with AC-3 or DTS power amplifier

• Connect the video terminal with the video input terminal of TV set (Video, S-Video or

YfCbfCr terminal)

• Connect the digital output terminal of this machine (optical or coaxial interface) with the

AC-3 or dts decoder via the optical or coaxial.

• Press the "Enter" key on the remote control to enter, then press the "set up" to exit the

function menu, and finish the sel.

• Press the Setup key on the remote control to enter (Function menu) .

• Press the Enter key on the remote control to confirm, then press the setup key to exit the

function menu, thus the selling is completed.

• Press the cursor key on the remote control to select the Audio Setting, then press

the cursor key on the remote control to select the digital output then Press the '-'Enter"

key to the next menu.

• Press the cursor

key on the remote control to select the SPDIF/code resource or

SPDIF/PCM output mode.

• Press the "Enter" key on the remote control to enter, then press the "set up' to exit the

function menu, and finish the set.

lnstall the battery into the remote control

Open battery compartment cover of the remote control,as shown by the following diagram.

lnsert two UM-4 or AAA batteries or batteries of same kind and ensure consistence between,

battery polarity and its marking. Close the cover as per the opposite direction of its opening.

Caution:

• Don't use any battery as mixed in new/old or with the different brands.

• Don't charge the battery or short connect it.

• Don't remove the battery or heat and burn it.

• Once the liquid is leaked out from the battery, please clean the Battery compartment

prior to install the new battery.

• Once the machine is unable to be operated although the remote control is so closely,

Please replace the new battery.

• Don't let the strong light is directly on the remote control or the ultra-red head on the

panel for connection so as to avoid any inference to the remote signal.

Remote instruction

1. open/close button

2. mute button

3. language l/r button

4. numeric button

5. setup button

6. automatically search

radio button

7. direction left button

8. menu button

9. title button

10. stop/return button

11. volume button

12. osd button

13. previous/radio- button

14. next/radio+ button

15. backward button

16. forward button

17. repeat button

18. slow button

19. DVD power button

20. source

button(dvd/usb)

21. record button

22. search frequency and

time button

23. DVD/FM/LINE

24. direction upper button

25. direction right button

26. enter button

27. direction lower button

28. usb title button

29. angle button

30. play/pause button

31. stop button

32. treble+ button

33. bass+ button

34. treble- button

35. bass- button

36. intro button

37. sound mode button

38. reset button

39. video mode button

40. pal/ntsc button

Remote button instruction

• Open/close button, Press to make the doors out of or into the disc player, so you put the disc

or show disc (disc shiny side down).

• Mute button, Press to enable the drive, an external input, the recorder's sound volume to 0

• Language l/r button, Press to switch channels

• Numeric button, This series of number buttons can help you jump to your desired track

• Setup button, Press to enter the system menu settings

• Automatically search radio button, Enter search radio mode, press this button to

automatically scan, and then automatically stored the channels with signal, "CH+", "CH -"

button can help you choose the next or previous channel.

• Direction left button, Function is as same as the "24", "25", "27" button, as in DVD playback

mode, enter the "menu" or "title" state, the four buttons can help you select the program, the

program selected was Yellow

• Menu button, When playing DVD, press the button to enter the menu

• Title button, When playing DVD, press the button to enter the title

• Return button, When playing DVD, press the button to stop playback and return to program

• Volume button, The button to adjust the sound volume

• Osd button, This button is displayed broadcast information on the television.

(In DVD mode) After the "Screen Display" button is pressed for the first time, the unit will

show the current number of play captions (chapters) and number of total captions (total

chapters) on the disc as well as play time of current music. When the key is pressed a

second time, the unit will show the remaining time of a chapter, and another press will close

the display.

(In VCD mode) After the "Screen Display" key is pressed for the first time, the unit will show

the play time of single music, and the remaining time of single music appears once the key

is pressed a second time; the third press is 10 show the play time of Ihe entire disc, the

fourth press is to show the remaining lime of the entire disc, and another press will cancel

the display.

• Power button, This button can be shut or open disc player.

• Source button(dvd/usb), At boot time, media, Play the media's priority is: disc →USB→SD

can also be forced to switch.

• Record button, When playing VCD, while stuck in a USB or SD card, press the button to

record the currently playing song and microphone voice to a USB or SD card. If you want to

only record the microphone voice,please use the remote control to mute the voice (press the

Mute button),enclosed a VCD disc, convenient for you to record.(Note: must be recorded

with the VCD disc,other kind disc without this function),When playing CD discs, this button

can copy the disc’s information to the USB disk or SD card

• Search frequency and time button, Press to display playing information on TV

• DVD/FM/LINE, The button to switch DVD, radio, tape (external signal)

• Enter button, Used in conjunction with the direction buttons.

• Play/pause button, This button is responsible for switch between “play” and “pause”

• Stop button, Press one time of this button to stop playing, Continue to play from the break,

also will continue to play from the break even after take out of the disc.

• Intro button, Press this button, each song will be played the first 10 seconds

• Sound field mode button, a total of 5 modes to choose from 0: acoustic; 1: Treble; 2: full

frequency; 3:medium; 4: Bass

• Video mode button, Through this setup, you can get the best picture quality.

Video Component: when using the Y, Cb, Cr, video connection to connect the TV, select

this button TV-RGB: when using S terminal or Composite video output, select this button

P-SCAN YPBPR: when using the Y, Cb, Cr, video connection to connect the TV, Switching

TV to progressive scan, can select this button

• Pal/ntsc button, PAL-NTSC selection:select automatic when TV Video output format is

automatic, select NTSC when TV video output format is NTSC, select PAL when TV video

output format is PAL.

Operation to functional menu (System setup)

Press setup button 10 enter into the General Setting Page, then press the direction button 10

select the relevant items as any high lighted item means the selection. Press Enter button 10

confirm current operation,

GENERAL SETUP

Select the setting key to enter into general setup page, the left is the

basic directory and the right is the sub-directory. Change the directory

and Sub-director by the direction key and press the Enter key for

operation.

TV SYSTEM SETUP

Select the TV system 10 enter into the next menu via the direction key.

Fix the TV system on connection for NTSC, PAl60, PAL and automatic.

SETUP AUTOMATICALLY PLAYBACK

When play disks with head adventure and warning

ON: directly jumped. OFF: no jumping.

SETUP HIGH DEFINITION OUTPUT

Select HD output optional, press the direct key to select, optional as

below:

HD OFF,720P,1080I, HD OFF: High definition OFF.

720P:connect with 720P TV Set by colour differential output terminal.

1080I:connect with 1080I TV Set by colour differential output terminal.

VIDEO OUTPUT SETUP

INTERLACE·YUV: This item may selected as the disc is connected to

the TV set in Y, Cb and Cr video video lines.

TV·RGB: This item may selected to connected to the TV set video

lines.

P·SCAN YPBPR: Available for the DVD player is connected with TV

set in Y, Pb and Pr video lines and change the TV to linear scanning.

TV TYPE SETUP (PICTURE RATIO)

4:3 PS: Select normal/panorama, the TV would be in full screen

display, while the partial pictures at four corners would be lost.

4:3 LB: Select normal/mailbox, the TV would be in full picture display.

16:9: Select the wide screen, the TV would be in full screen display,

while the partial pictures at both left and right sides would be lost.

PASSWORD SETUP

The primary setting is at password locking, while the Grade is unable

to be selected and the password is unable to be changed. Once the

Grade is to be set, you shall press the digital key and enter the digital

password of 0000 to enter.

RATING(GRADE)

When playing the disc with locking function, you may select the

available age control grade as per the disc grades and your actual

needs in the following grades: 1. KID SAFE, 2.G, 3. PG,4.PG13 ,5.PG-

R,6.R,7.NC-17, 8.ADULT. This function is only available for the disc

with the grade limitation, which to be realized by setting the password

once the password lock is opened.

ST120 Achterzijde

1. Antenne A voor draadloze microfoon

2. Netentree

3. Video uitgang groen (G)

4. Audio uitgang rechts voor

5. Video uitgang blauw (B)

6. Audio uitgang links voor

7. Video uitgang rood (R)

8. Coaxiale digitale uitgang

9. Video uitgang

10. S-video aansluiting

11. Optische uitgang

12. FM antenne/AntenneB

13. Ventilator

14. Externe 12Vdc aansluiting

15. Luidspreker uitgang

16. Audio ingang

Systeem aansluiting

Deze speler heeft geen ingebouwde DTS decoder, als u een DTS diskette afspeelt geeft de

analoge uitgang geen geluid, u dient de setup toets op de afstandsbediening te gebruiken om

audio te selecteren voor SPDIF/SOURCE Code. U krijgt het geluid terug door Digital Decoderen

(DTS versterker). Zie Schema verderop in de handleiding.

Aansluiting op de TV (AV ingang)

In de verpakking zit een AV kabel.

• Sluit de AV uitgang van de speler aan op de AV ingang van de TV (Video: gele

aansluiting). Zie aansluitschema hieronder.

• Sluit de audio uitgang (rood/wit) van de speler aan op de audio ingang van de TV

(rood/wit). Zie aansluitschema hieronder.

• Zet via het menu de DVD speler in de gewenste mode (Videosignaal PAL, PAL60, NTSC

of AUTO)

Aansluitmogelijkheden VIDEO, S-VIDEO EN RGB:

AC-3 of DTS versterker :

• Sluit de video aansluiting van de speler aan op de TV (Video, S-Video of YfCbfCr).

• Sluit de digitale uitgang van de speler aan op de optische- of coaxiale aansluiting van de

AC-3 of DTS versterker.

• Druk de "Enter" toets op de afstandsbediening om in het menu te komen, druk na

selectie de "set up" toets om het menu te verlaten.

• Druk de Setup toets op de afstandsbediening om in het menu te komen.

• Druk de Enter toets op de afstandsbediening om de keuze te bevestigen, druk de setup

toets om het menu te verlaten.

• Druk de pijltoetsen om de gewenste Audio-instelling en de digitale uitgang te

selecteren, druk daarna de '-'Enter" toets om naar het volgende menu te gaan.

• Druk de pijltoetsen om SPDIF/code of SPDIF/PCM uitgang te selecteren.

• Druk de "Enter" toets op de afstandsbediening om in het menu te komen, druk daarna de

"set up' toets om het menu te verlaten.

Batterijen

2x UM-4 of AAA batterijen en denk aan de polariteit.

• Plaats geen nieuwe/oude batterijen door elkaar.

• Sluit batterijen niet kort, verbrand ze niet als ze leeg zijn. Laad eenmalige batterijen niet

op.

• Als batterijen lekken, maak dan eerst het vakje schoon alvorens nieuwe te plaatsen.

• Als de afstandsbediening slecht werkt plaats dan eerst nieuwe batterijen.

AFSTANDSBEDIENING

1. OPEN / CLOSE :Openen / sluiten lade .

2. MUTE : Schakelt het geluid uit.

3. AUDIO : Hiermee kunt u verschillende soorten geluidsweergaven selecteren.

4. Toetsen (0-1/9 en 10): Hiermee kunt u direct naar een track schakelen.

5. SETUP : Druk op deze knop om in het menu te komen.

6. AUTO: Gebruik deze toets om het automatisch zenderzoeken van de radio te starten.

7. Navigatietoets naar links : Beweegt de cursor in het menu naar links.

8. MENU : Druk op deze toets om het hoofdmenu weer te geven en maak de gewenste

selectie.

9. TITLE : Op sommige DVD's kan de titel worden weergeven.

10. RETURN: Om te schakelen tussen 2 zenders/tracks.

11. VOL - / +: Regelt het volume.

12. On-screen-display (OSD): Hiermee kunt u via het scherm diverse info ophalen: In DVD-

mode als de toets 1x wordt gedrukt wordt de afspelende track, speeltijd en totaal aantal

tracks weergegeven. Als de toets 2x wordt gedrukt wordt de resterende afspeeltijd

weergegeven van de track. Nog een keer drukken op de toets sluit de OSD mode. In

Video (VCD) mode als de toets 1x wordt gedrukt wordt de afspeeltijd van een track

weergegeven en als de toets 2x wordt gedrukt wordt de resterende afspeeltijd

weergegeven van de track. Bij een derde druk op de toets wordt de totale afspeeltijd van

de diskette weergegeven. Een vierde keer drukken geeft de resterende afspeeltijd van

de diskette weer. Nog een keer drukken sluit de OSD mode.

13. CH-): Hiermee kan geschakeld worden naar een vorige track of radiostation.

14. CH +): Hiermee kan geschakeld worden naar een volgende track of radiostation.

15. Snel terugzoeken.

16. Snel verder zoeken.

17. REPEAT: Herhaal toets.

18. SLOW: Afspelen in slow motion. Druk op PLAY om terug te keren naar normale

afspeelmode.

19. POWER :Druk op deze toets om het toestel aan-of uit te schakelen.

20. SOURCE : Bronkeuze , hiermee selecteert u de weergave van de bron DVD of USB-

poort.

21. COPY: Een selectie reproduceren.

22. Zoek-toets (T / F): Om een DVD weergave of een radiofrequentie te zoeken.

23. AM / FM-toets: Om bij het gebruik van de tuner te selecteren tussen AM/FM mode.

24. Scroll omhoog : Beweegt de cursor in het menu omhoog.

25. Navigatietoets naar rechts : Beweegt de cursor in het menu naar rechts.

26. Enter-toets (ENTER): Valideert een actie of aanpassing.

27. Scroll omlaag : Verplaatst de cursor in het menu naar beneden.

28. Ondertiteling (SUBTITLE): Toont de ondertitels.

29. ANGLE (hoek): Selecteert de invalshoek van de weergave (op sommige DVD's).

30. Play / Pauze: Druk op deze knop om het afspelen te starten of te onderbreken.

31. Stop-knop : Deze knop stopt het afspelen.

32. TRE +: Instelling van de hoge frequenties verhogen.

33. BASS +: Instelling van de lage frequenties verhogen.

34. TRE -- : Instelling van de hoge frequenties verminderen.

35. Bass --: Instelling van de lage frequenties verminderen.

36. Hiermee selecteert u de AUX ingang (audiobron). Aansluiting zit op de achterkant van de

set.

37. Audio Select toets (DSP): Hiermee kunt u de gewenste audio-modus selecteren.

38. Reset-toets (RESET): Reset de programmering.

39. VIDEO: Hiermee selecteert u de gewenste video-modus om het beste beeld te krijgen.

40. P / N : Hiermee selecteert u de video-standaard PAL of NTSC.

Systeem setup

Druk de Setup (5) toets om in het hoofdmenu te komen, druk dan de pijltoetsen om uit het

gewenste submenu te kiezen. Maak een selectie en druk de Enter toets om te bevestigen.

SETUP

Met de linker pijltoets 7 kiest u “ het hoofd-menu” en met de rechter

pijltoets 25 “het sub-menu”. Met de toetsen 24 en 27 navigeert u

door het menu. Druk na keuze altijd de Enter toets om af te sluiten.

SYSTEM SETUP

Kies hier het videosignaal uit de volgende mogelijkheden : NTSC,

PAL60, PAL of AUTOmatic.

AUTOMATICALLY PLAYBACK

Automatisch afspelen.

ON: OFF:

HIGH DEFINITION OUTPUT

Selecteer HD uitgang (optie) en maak keuze uit:

HD OFF,720P,1080I, HD OFF: High definition OFF.

VIDEO OUTPUT

Selecteer INTERLACE·YUV als de speler is verbonden met de TV (Y,

Cb en Cr video ), TV·RGB, P·SCAN YPBPR als de speler is verbonden

met de TV (Y, Pb and Pr) en zet de TV op linear scanning.

PICTURE RATIO (Display formaat)

Kies hier de beeldverhoudingen :

4:3 PS: Pan & Scan

4:3 LB:

16:9:

PASSWORD SETUP

Het instellen van een wachtwoord. Het instellen van ouderlijk toezicht

is beschermd door een wachtwoord. Het standaard wachtwoord is

0000

RATING(LEEFTIJD)

Beperking niveau ouderlijk toezicht. De leeftijd is hier in te stellen.

Druk de enter toets om naar de volgende pagina(s) te gaan : default value,

picture select, resume, previous page. (zie hieronder).

DEFAULT VALUE

De speler gaat terug naar de fabrieksinstelling (reset instellingen). Uw

persoonlijke instellingen gaan verloren.

PICTURE SELECT

Default: Fabrieksinstelling van het beeld.

Costume picture: Persoonlijke instelling van het beeld.

RESUME

De geheugenfunctie van de speler activeren.

ON: Geheugen inschakelen.

OFF: Geheugen uitschakelen.

Druk in deze mode de enter toets om naar de vorige pagina(s) te gaan.

LANGUAGE INSTELLING

Selecteer deze functie in het hoofdmenu.

Kies OSD Language in het submenu om de taal te kunnen selecteren die in

de display verschijnt. Kies:

English of Chinese

INSTELLING AUDIO LANGUAGE

Het instellen van de Audio-taal. Selecteer Audio Lang in het submenu en

kies de gewenste taal. Druk na uw keuze op Enter om te bevestigen.

INSTELLING (Ondertiteling) SUBTITLE LANGUAGE

Kies Subtitle Language in het sub-menu.

Selecteer de gewenste taal voor de ondertiteling en druk na uw keuze op

Enter.

INSTELLING MENU LANGUAGE

Kies Menu Language in het sub-menu om de menu-taal te selecteren.

Selecteer de gewenste menu taal en druk na uw keuze op Enter.

INSTELLING DIGITALE AUDIO OUTPUT

SPDIF/OFF: Als er geen digitale apparatuur wordt aangesloten selecteer

dan OFF.

SPDIF/RAW: Wanneer de digitale audio uitgang is aangesloten op een

versterker met een Dolby decoder selecteer dan RAW.

SPDIF/PCM: Als een 2-kanaals digitale stereo versterker is aangesloten

selecteer dan PCM.

TONE INSTELLING

Schuif de regelaar naar de gewenste toon instelling.

MIC (Microfoon) setup

VIDEO INSTELLING

BRIGHTNESS SETUP

Schuif de regelaar naar de gewenste helderheidsinstelling.

CONTRAST INSTELLING

Schuif de regelaar naar de gewenste contrastinstelling.

HUE INSTELLING

Schuif de regelaar naar de gewenste tint (kleur) instelling.

SATURATION INSTELLING

Schuif de regelaar naar de gewenste instelling voor verzadiging van de

video uitgang.

SPEAKER SETUP

MIX (downmlx)MODE

LT/RT: Wenn die DVD-Scheibe Dolby Stereo hat, wählen Sie LT/RT. Der

audio Ausgang folgt dem decoder System der DVD.

Stereo: Für einen 2-Kanal (stereo) Ausgang. Gleichsam wie ein

“erzwungenes” Stereo Signal.

Dolby digital Einstellung

Line output: Audio Ausgang wo das Bass-signal oder ein Teil des Signals

ist gefiltert. Geeignet für eine ruhige Umgebung.

Wenn Sie “Line output” bestätigt haben gehen Sie zur nächsten

Einstellung : Dynamic Range

DYNAMIC RANGE EINSTELLUNG

Wenn Sie “Line output” bestätigt haben, gehen Sie zur Dynamic Range

Einstellung. (FULL : der Spitzenwert (peak-peak) des audio Signals ist

minimal. OFF : Der Wert ist maximal. (Funktioniert nur wenn Mix Mode ist

OFF)).

LEFT/RIGHT MONO EINSTELLUNG

Mode Einstellung für L und R Ausgang: Stereo, Linker Kanal, Rechter

Kanal und eine Mischung der Kanäle. Geeignet für Karaoke Anwendung

(AC-3).

ANWEISUNGEN

Versorgung

AC Netzspannung

Das Netzkabel an das System anschließen (5) und das System einschalten. Stellen Sie die

Position des Lautstärke Reglers auf “Minimum” ein.

Externe DC Spannung

Dieses System funktioniert auch über eine externe 12V DC-Buchse. Schließen Sie die

externe12V Gleichspannung an den DC-Eingang an auf der Rückseite des Systems. Beachten

Sie die Polarität. Stellen Sie die Position des Lautstärke Reglers auf “Minimum” ein.

Wiederaufladbare Batterie

Dieses System kann auch über eine eingebaute 12V Batterie funktionieren. Beim Anschluß

einer 230Vac Spannung, leuchtet die CHARGE-LED-Anzeige rot, als Zeichen daß die Batterie

aufgeladen wird. Wenn die FULL-LED grün leuchtet, ist die Batterie vollständig geladen und das

System kann verwendet werden.

Schalten Sie die Stromversorgung aus / OFF und ziehen Sie das Netzkabel. Stellen Sie die

Position des Lautstärke Reglers auf “Minimum” ein.

Schalten Sie das System wieder "ein " / ON und die Batterie liefert die Betriebsspannung.

Die Batterie lädt schneller wenn das System ausgeschaltet ist .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skytec ST120 Mobile Amplifier in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skytec ST120 Mobile Amplifier Manual

Product: