Manual Skytec SKY MKII (page 6 of 26) (English, German, Dutch, French)

490954

Zoom out

Zoom in

1/26

6 - 26

Setup operation mode

Amplfier can used in 2 modes:

1. Stereo operation

Set the mode selector (3) to the ‘stereo’ position.

In this mode the amplifier have two independed channels with there own inputs and volume controls.

2. Bridge operation

Set the mode selector (3) to the ‘bridged’ position.

This mode combines both amps on one channel which results in double power on this channel.

Connects the signal to the A input channel and the output level can now be adjusted with the A

volume control. Connect the speaker across the positive (+) output therminals. Do not use the

negative (-) terminals when the amplifier is being operated in bridged mode.

NOTE: Never connect a hot (+) output to ground or (-) output and never connect the hot (+) to

other hot outputs!

Connect to mains power

Before plugging the unit in always make sure that the power supply matches the product specification

voltage. First connect the IEC end of the cordset to the IEC connector on the amplifier then plug the

other end of the cordset to the AC mains.

Please read instructions below for reliable and problem free use:

•

Be sure all connections made are made in the correct way.

• Check if the connected speakers are compatible with the amplifier.

• Ensure there is adequate ventilation.

• Prevent exposure to moisture.

• Never plug speakers in/or out while in use, this can result in serious damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skytec SKY MKII in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skytec SKY MKII Manual

Product: