Manual Skytec PA 200 - 170.122 (page 3 of 12) (English, German, Dutch)

574867

Zoom out

Zoom in

1/12

DISPLAY PANEL:

DIAGRAM AND PARTS DESCRIPTION

1. CUE: To define and record a return point from which playback it again.

2. PLAY/PAUSE: Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.

3. REVERSE: Push the reverse button to play your track in reverse, push the reverse button again to cancel this feature.

4. SKIP << BUTTON: You may forward to navigation through one track.

5. IN BUTTON (LOOP SYSTEM): This button sets the beginning point of the loop and light is illuminate.

6. OUT BUTTON (LOOP BUTTON): When you press this button, you set the end point of the seamless loop and you start the loop. To finish the

loop, press again this button.

7. RELOOP BUTTON (LOOP SYSTEM): This button is used to start the last saved loop. To finish the loop, press the reloop button.

8. SKIP >> BUTTON: You may backward to navigation through one track.

9. ID3: When you pressing the ID3 button, Able to show the name of songs on led display.

10. PITCH CONTROL: Use this fader to increase or decrease the speed of the track. Slide up to decrease the pitch and slide down to increase the

pitch.

11. DISPLAY: LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.

12. USB PORT: Allows the connection of any USB memory stick.

13. SD CARD SLOT: Slot for inserting SD card. The contacts of the card must point downwards. The unit cannot read cards with a capacity of more

than 4GB. The unit is not compatible to SDHC cards and only.

14. TIME BUTTON: Used this knob to choose the time mode, Elapsed time, remaining time or total remaining time.

15. REPEAT BUTTON: Use this button to repeat one track or all the track of the CD.

16. SINGLE: Press these to switch between the SINGLE and CONTINUE play mode. The selected mode is indicated on the LCD. In SINGLE mode,

after each track, the unit stops the reading. In CONTINUOUS mode, the unit read all track and stops.

17. USB/SD: To select audio source between USB storage and SD card.

18. PITCH BEND - BUTTON: The pitch will drop while the - button is pressed and return to the original pitch when it is released.

19. PITCH BEND + BUTTON: The pitch will automatically rise when the + button is pressed and return to the original pitch when it is released.

20. PITCH BUTTON: If you this button, the adjustement of the pitch potentiometer is available.

21. FOLDER/TRACK SEARCH: Allows you to navigate through folders or tracks similarly in either USB or CD mode.

When navigating a standard CD turn the rotary to the right to advance the selection or turn the rotary to the left to decrease the selection.

How do I use the Bluetooth connection? On the skytec Pa-200 Submitted on 4-11-2018 at 03:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skytec PA 200 - 170.122 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skytec PA 200 - 170.122 Manual

Product: