490937
2
Zoom out
Zoom in
Previous page
1/5
Next page
153.225 Fireball lamp
Warning:
Prior to first use, please read this manual carefully.
Only for indoor use. Do not use the unit in humid environments.
Unplug the unit from the mains before you open it.
If the mains lead is faulty or damaged, only replace it by a lead recommended by SkyTronic.
SkyTec disco light effects contain modern lamps of high intensity. During the use they develop
considerable heat. Place the light effect at least at 50cm distance from inflammable materials such as
curtains, books, etc. Check that the housing can’t be touched by accident.
Location:
Connect the light effect to an earthed outlet only.
For indoor use only in a dry environment.
Make sure the unit is placed on a strong, heat-resistant surface. Vibrations shorten the life-time of the
lamp.
Do not obstruct the ventilation holes in order to ensure sufficient air flow.
Use
The unit should only be operated by qualified persons.
Disco light effects are not meant for continuous use. An alternating use increases the life time
considerably.
The light effects must be directly connected to the mains, without the use of a dimmer.
Regularly check the ventilation holes and clean them, if necessary.
Replacement of the lamp
Only use high quality lamps that comply with the standard EN60357.
Prior to replacing the lamp, let the unit cool down for 5 minutes.
WARNING!! Do not open the unit while it is in use or plugged into an outlet.
- Open the housing by removing the two screws on the top.
- Remove the half ball.
- Replace the faulty lamps with two E14 240V/25W lamps.
- Place the half ball back again and fasten it via the two screws.
Trouble-shooting
- Check if the outlet is powered.
- Check if the mains switch is set to “1”
- Check the fuse of the light effect
- Check if the lamps are not blown and replace them if necessary.
Do not attempt to make any repairs by yourself. All repairs have to be carried out by qualified
staff.
Specifications:
Power................................................................................................................220-240Vac / 50Hz
Consumption............................................................................................................................ 60W
Lamps ..................................................................................2 x E14 , 240V/40W (ref no. 153.226)
Fuse ................................................................................................................................... F500mA
Rotation speed...................................................................................................20-24 rotation/min.
Dims....................................................................................................................... 195 x 195 x 160
Weight..................................................................................................................................... 1.1kg
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec Fireball lamp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec Fireball lamp in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info