490962
4
Zoom out
Zoom in
Previous page
1/20
Next page
NOTE : L-- refers to data information of CH1, CH2, CH3 and CH4 corresponding to 1, 2, 3 and 4
output.
R-- refers to data information of CH1, CH2, CH3 and CH4 corresponding to 4, 3, 2 and 1
output.
A.5. F + D/S BUTTONS ( Press F and D/S buttons at a time )
Press to select CRO or NOR.
NOTE : NOR refers to 0-100% dimming.
CRO denotes only FULL ON and STAND BY are available. When dimming level is greater
than 50%.
FULL ON is activated, otherwise, STAND BY is effective.
A.6. F + MODE BUTTONS
This function is effective only in MASTER mode.
A.7. F + PRESET BUTTONS
Press F + PRESET to select available parameter, adjust the selected parameter with UP and DOWN
buttons.
PARAMETER FUNCTION
F00-F99
FADE TIME ( 0-10S )
000-0FF
DIMMER ( 0-100% )
R01-R99
SPEED ( 1/60 STEP PER SECOND TO 20 STEP PER SECOND )
E00-E25
PRESET MINIMUM DIMMING LEVEL ( 0-25% )
P01-P16
PROGRAM ( 1-16 )
A.8. F + SIGNAL SELECT BUTTONS
Press to switch operating mode from DMX to MASTER mode, and the DISPLAY will show OUT.
A.9. F + SIGNAL SELECT + RESET BUTTONS
Press to perform a reset for the whole system, which enables to return to initial condition.
A.10. DMX indicator blinks when preheat is effective, otherwise lights.
A.11. SIGNAL indicator blinks when DMX signal is available and goes out when not available.
A.12. DISPLAY shows IN and channel indicators stop blinking after 10 seconds when operation is paused.
B. MASTER mode
When the MASTER indicator is on ( Press “F + SIGNAL SELECT” until DISPLAY shows OUT ), this unit
is used as a DMX chase controller.
B. 1. F + MODE BUTTONS
Press to select desired operating mode.
This function is effective only in MASTER mode. The operating modes are changed in order of:
MANUAL DIMMER
MANUAL PROGRAM AUTO PROGRAM
AUTO SOUND PROG SOUND HOLD SOUND
B. 1. 1. MANUAL DIMMER
Normally, the dimming level of all four channels are the same ( 0-100%, DISPLAY shows d00-dFF ).
Press F + PRESET buttons, dFF will shows on DISPLAY, press UP or DOWN can adjust the total
dimmer level.
Press one of buttons 1, 2, 3 and 4, corresponding indicator will blink, then select desired dimming
level using UP or DOWN button. These 4 buttons are effective only when MANUAL DIMMER
indicator is on.
Press F + RESET buttons to withdraw from this condition, the indicator won’t blink.
B. 1. 2. MANUAL PROGRAM
Press F + PRESET to select available parameter, adjust the selected parameter with UP and
DOWN buttons.
PARAMETER FUNCTION
F00-F99
FADE TIME ( 0-10S )
000-0FF
DIMMER ( 0-100% )
R01-R99
SPEED ( 1/60 STEP PER SECOND TO 20 STEP PER
SECOND )
E00-E25
PRESET MINIMUM DIMMING LEVEL ( 0-25% )
P01-P16
PROGRAM ( 1-16 )
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec DMX Light Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec DMX Light Controller in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info