766703

Skytec 179.175 Manual

7
Zoom out
Zoom in
Previous page
1/29
Next page
TIPS FOR ACHIEVING MAXIMUM PERFORMANCE
Make sure you can always see a receiver antenna from the transmitter position.
Keep the distance from transmitter to receiver antenna as short as possible.
Point receiver antennas away from each other at a 45 angle from vertical.
Avoid placing the receiver antennas near metal surfaces and obstruction.
Monitor battery fuel gauge and replace battery as soon as red light is on.
If stacking or rack mounting receivers In a multiple-system use situation, do not allow antennas to touch
or cross.
Perform a walk-through before Performance or Presentation .If dead spots are found, adjust location of
receiver .If dead sports remain ,mark spots and avoid.
TROUBLESHOOTING
PROBLEM INDICATOR STATUS SOLUTION
No sound Red transmitter indicator is not
flash
Slide transmitter POWER ON/OFF switch to ON
Make sure battery is Inserted properly, observing battery
("+/."). If battery is inserted
properl
y
. replace with fresh batter
y
.
No sound Red transmitter indicator Is flash Slide transmitter MUTE/ON switch to ON position
No sound Red receiver POWER light off. Make sure ac adapter is securely plugged into electrical
outlet and into de input connector. Make sure ac
electrical outlet works and supplies proper volta
g
e.
No sound Receiver signal Indicators A/B
lights glowing
Turn up receiver volume control. Confirm that the output
connections from the receiver to the external equipment
are secure.
No sound Receiver signal Indicators A/B
lights off, Transmitter and
receiver POWER li
g
hts
g
lowin
g
Confirm transmitter’s and receiver’s frequencies match.
Move transmitter closer to receiver
Sound level differs
from level of a
cabled instrument
Receiver signal Indicators A/B
lights glowing Adjust transmitter gain level to compessary
Adjust receiver volume as necessary
Sound level differs
with different
g
uitars Receiver signal Indicators A/B
li
g
hts
g
lowin
g
Readjust transmitter gain level to compensate for
differences In
g
uitar outputs
Distortion level
increases gradually
Receiver Signal Indicators A/B
Lights and transmitter LOW
BATTERY li
g
ht
g
lowin
g
Replace transmitter battery
Bursts Of noise or
other audible radio
si
g
nals present Signal Indicators A/B lights on Identify potential sources of interference (other
RF·sources) and turn off, remove or use a wireless
s
stem operatin
on a different frequenc
Momentary loss of
sound as transmitter
is moved around.
performin
g
area.
Receiver signal Indicators A/B
lights off when sound is lost
Reposition receiver and perform walkthrough test, if
audim dropouts persist mark "dead" spots and avoid
them during performance
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec 179.175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec 179.175 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info