777721

Skytec 178.406 KA-08 Manual

6
Zoom out
Zoom in
Previous page
1/22
Next page
OPERATION:
Connect the passive speaker with the supplied connection cable to the speaker output
connector (21). WARNING: only connected the original slave speaker on the speaker output
terminal!
If required connect an external signal source like a CD-player to LINE IN (20).
Connect the device with an electric outlet (230VAC / 50Hz).
LINE INPUT (DVD, CD-player etc.):
1. Connect the source (DVD-player, CD-player etc.) to the line input on the rear panel (20)
2. Push the input selector to Audio position
3. Volume can be controlled with master volume control
USB/SD player:
1. Push the input selector to the USB position.
2. Insert USB-stick or SD-card with MP3 files in the MP3-player.
3. MP3 files will be played after a few seconds.
4. Volume can be controlled with master volume control.
5. Previous track can be selected with PREV button on MP3-player.
6. Next track can be selected with NEXT button on MP3-player.
7. Pressing the PAUSE button on the MP3-player will pause the song and again pressed
will continue playing.
MICROPHONE:
1. Insert the microphone to the MIC1, MIC2 or MIC3.
2. Adjust the MIC volume.
GUITAR (when available):
1. Insert the guitar to the guitar input jack.
2. Adjust the GUITAR volume.
WIRELESS MICROPHONE (when available):
1. Open the battery compartment cover. Insert battery, observing polarity
2. Re-attach the battery cover.
3. Turn on the microphone by using the power switch.
4. The battery LED indicator will light, indicating full battery strength. In the
case of a low or dead battery, the battery LED will extinguish, indicating
that the battery should be replaced with a fresh one.
5. The IR indicator in the amplifier should now be lit.
6. To preserve battery life, turn the microphone off when not in use. If you
are not going to use the microphone for a long period of time, take out
the battery from microphone to avoid possible battery leakage to
damage the microphone.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skytec 178.406 KA-08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skytec 178.406 KA-08 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info