490968
9
Zoom out
Zoom in
Previous page
1/88
Next page
H. Device Code Write Protection (2431, 2432, 2433):
Proceed as follows to prevent device codes from being accidentally overwritten or deleted:
1. Press the remote control device button (e.g. TV) which you wish to protect.
2. Press and hold down the SET button, simultaneously press number button 7 and then
release both buttons. The LED flashes twice and the code is now protected and cannot be
overwritten/deleted.
Note:
To cancel the write protection, press and hold down the SET button, simultaneously press
number button 8 and then release both buttons. The LED flashes twice and the protection is
cancelled.
Battery Requirement
This remote control needs two batteries to work with. Refer to the direction mark inside the
battery apartment and put 2 pieces of fresh AAA, or R03 or UM4 in the battery apartment.
Alkaline batteries are recommended. Remember to replace the batteries at least once a year.
Others
After you have finished set-up, first please press the device key (TV or VCR…) on remote control
that you want to use, then operate your remote control normally. If you find your remote control
disorder, please take out the batteries, press keys several times to discharge the unit and then
you put the batteries again. Your remote control may be normally now. Please note that some
keys of this remote control could have some other symbols like your original remote control.
Declaration of Conformity
If desired, please use the following email address to obtain the Declaration of Conformity for this
product: info@sm-electronic.de
Warranty
SM Electronic and its suppliers shall neither be liable for any data loss which occurs during
operation of the product nor for any consequential damage.
Updating the manual
Go to the following address to download our manuals: www.sm-electronic.de
Dear customer!
Please bear in mind that unjustified complaints will cost you money! Please consult our telephone
HOTLINE if you need assistance. Here experts will provide you with speedy advice and tips on
localising the cause of a fault. If it transpires that the problem is actually a defective device,
please send it in for repair with a precise description of the fault.
Our HOTLINE:
(D) 0900 1 512 532 (€ 0,25/Min.)
(A) 0900 400 222 (€ 0,64/Min.)
Monday to Sunday from 8.00 - 22.00
SM ELECTRONIC GmbH
Waldweg 2
D-22145 Stapelfeld/Braak
Internet: www.skymaster.de
E-Mail: info@sm-electronic.de
Subject to technical changes. Skymaster
®
is a registered trademark.
9
Waste electrical and electronic equipment is classed as recyclable waste and
does not belong in domestic refuse!
We therefore request you to actively support the conservation of resources and
environmental protection and to dispose of this device at responsible take back
points – if possible.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skymaster 2431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skymaster 2431 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info