Manual Skoda Superb - 2014 (page 211 of 252) (English)

678350

211

Zoom out

Zoom in

1/252

The mounting points are located on the metal bar of the lower sill on the un-

derside of your vehicle. The positions of these are embossed by means of

markings on the side surface of the lower sill » Fig. 181.

›

Support the base plate of the jack with its full area resting on level ground

and ensure that the jack is located in a vertical position at the jacking

point » Fig. 181 -



›

Position the lifting jack below the jacking point with the crank and move it up

until its claw encloses the web » Fig. 181 -



›

Continue turning up the jack until the wheel is just about lifted off the

ground.

WARNING

Notes for vehicle lifting

■

Choose a flat and firm surface for jacking the vehicle.

■

If the wheel has to be changed on a slope, first of all block the opposite

wheel with a stone or similar object to prevent the vehicle from unexpect-

edly rolling away.

■

Secure the base plate of the lifting jack with suitable means to prevent

possible moving. A soft and slippery ground under the base plate may move

the lifting jack, causing the vehicle to fall down. It is therefore always nec-

essary to place the lifting jack on a solid surface or use a wide and stable

base. Use a non-slip base (e.g. a rubber foot mat) if the surface is smooth,

such as cobbled stones, tiled floor, etc.

■

Only attach the lifting jack to the attachment points provided for this pur-

pose.

■

Always raise the vehicle with the doors closed.

■

Never position any body parts, such as arms or legs under the vehicle,

while the vehicle is raised with a lifting jack.

■

When the vehicle is raised, never start the engine.

CAUTION

It is important to ensure that the jack is correctly attached to the web of the

lower fork leg, otherwise there is a risk of damage to the vehicle occurring.

Anti-theft wheel bolts

Fig. 182

Principle sketch: Anti-theft

wheel bolt with adapter

Read and observe on page 206 first.

The anti-theft wheel bolts protect the wheels from theft. These can only be

loosened or tightened with the use of adapter

» Fig. 182.

›

Remove the full wheel trim or the caps of the wheel bolts.

›

Insert adapter

» Fig. 182 with the toothed side all the way into the inner

teeth in the head of the anti-theft wheel bolts

›

Push the wheel wrench onto the adapter

up to the stop.

›

Loosen or tighten the wheel bolt » page 207.

›

Remove the adapter.

›

Replace the wheel trim or the caps.

To be equipped for a possible wheel change, the adapter for the anti-theft

wheel bolts must always be kept in the vehicle. The adapter is stowed in the

tool kit.

Note

■

Note the code number which is embossed both on the adapter and also on

the end of each anti-theft wheel bolt. This number can be used to purchase a

replacement adapter from ŠKODA Original Parts if necessary.

■

The anti-theft wheel bolt set and adapter can be purchased from a ŠKODA

Partner.



208

Do-it-yourself

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Superb - 2014 in the language / languages: English as an attachment in your email.

The manual is 17,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda Superb - 2014

Skoda Superb - 2014 User Manual - German - 260 pages

Skoda Superb - 2014 User Manual - Dutch - 260 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Skoda Superb - 2014 Manual

Product: