678237
218
Zoom out
Zoom in
Previous page
1/256
Next page
Attach the valve remover
2
» Fig. 250 on page 215 onto the valve insert, so
that the valve insert fits into the slot of the valve remover.
Unscrew the valve insert and place it on a clean base (rag, paper etc.).
Forcefully shake bottle
10
several times.
Firmly screw the inflation hose
3
onto the tyre inflater bottle
10
. The film
on the bottle cap is pierced.
Remove the plug from the inflation hose
3
and insert the bottle onto the
tyre valve.
Hold the bottle
10
with the bottom facing upwards and fill all of the sealing
agent from the tyre inflater bottle into the tyre.
Remove the filler plug from the tyre valve.
Screw in the valve insert with the valve remover
2
.
Inflating
Screw the air compressor tyre inflation hose
5
» Fig. 250 on page 215 firmly
onto the tyre valve.
For vehicles with manual transmission, set the lever in the neutral position.
On vehicles with automatic transmission, place the selector lever in the P
position.
Start the engine.
Plug the connector
8
into the 12 volt socket » page 78.
Switch on the air compressor with the ON and OFF switch
9
.
Once tyre inflation pressure of 2.0-2.5 bar has been reached, turn off the air
compressor. Observe the maximum running time of the air compressor ac-
cording to the instructions of the repair kit manufacturer »
.
If an air pressure of 2.0-2.5 bar has not been reached, unscrew the tyre infla-
tion hose
5
from the tyre valve.
Drive the vehicle 10 metres forwards or backwards to allow the sealing
agent to “distribute” in the tyre.
Firmly screw the tyre inflation hose
5
back onto the tyre valve and repeat
the inflation process.
Stick the corresponding sticker
1
onto the dashboard in the driver's field of
view.
At a tyre inflation pressure of 2.0 – 2.5 bar, the journey can be continued at a
maximum speed of 80 km/h or 50 mph.
WARNING
If the tire does not inflate to at least 2.0 bar, the damage is too great. The
sealing agent cannot be used to seal the tyre. Do not drive the vehicle!
Seek help from a specialist garage.
The tyre inflation hose and air compressor may get hot as the tyre is be-
ing inflated – there is a risk of burning.
CAUTION
Switch off the air compressor at the latest after the running time according to
the instructions of the repair kit manufacturer has elapsed – otherwise there is
the risk of compressor damage! Allow the air compressor to cool a few mi-
nutes before switching it on again.
Information on driving with repaired tyres
Read and observe on page 215 first.
The inflation pressure of the repaired tyre must be checked after driving for 10
minutes.
If the tyre pressure is 1.3 bar or less
The tyre cannot be properly sealed with the breakdown kit.
Do not con-
tinue to drive! Seek help from a specialist garage.
If the tyre pressure is 1.3 bar or more
Set the tyre pressure back to the correct value » page 206.
Continue driving carefully to the nearest specialist garage at a maximum
speed of 80 km/h (50 mph).
WARNING
A tyre filled with sealant has the same driving characteristics as a standard
tyre. The following guidelines must be observed.
Do not drive faster than 80 km/h (50 mph).
Avoid accelerating at full throttle, sharp braking and fast cornering.
216
Do-it-yourself
218


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda Rapid Spaceback - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Rapid Spaceback - 2018 in the language / languages: English as an attachment in your email.

The manual is 40,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda Rapid Spaceback - 2018

Skoda Rapid Spaceback - 2018 User Manual - German - 264 pages

Skoda Rapid Spaceback - 2018 User Manual - Dutch - 268 pages

Skoda Rapid Spaceback - 2018 User Manual - French - 264 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info