678296
162
Zoom out
Zoom in
Previous page
1/184
Next page
Removing/installing taillights
Fig. 197 Remove light / pull out connector
Read and observe and on page 156 first.
Removing
Open the boot lid.
Insert the clamps for removing the full wheel trims into opening
A
» Fig. 197.
Remove the cover by pulling the hook in the direction of arrow
1
.
Unscrew the screws
B
with the key from the tool kit.
Grasp the lamp and carefully remove in the direction of arrow
2
.
Press the latch on the connector in the direction of arrow
3
.
Carefully remove the connector from the tail lamp assembly in the direction
of the arrow
4
.
Fitting
Insert the connector into the light and lock it securely.
Insert the lamp with the pin
B
» Fig. 198 on page 160 into the recesses
C
» Fig. 197 in the body.
Carefully push the cover in » .
Screw the tail lamp into place and install the cover. The cover must engage
securely.
Close the boot lid.
CAUTION
Ensure that the cable bundle does not become pinched between the body
and the lamp when it is being refitted – risk of damage to the electrical instal-
lation and risk of water ingress.
If you are not sure whether the cable bundle has become pinched, we recom-
mend that you have the light connection checked by a specialist garage.
Ensure that the vehicle paintwork and the tail lamp are not damaged when
removing and installing the tail lamp.
Replacing the bulbs in the taillight assembly
Fig. 198 Outer part of the lamp/inner part of the lamp
Read and observe and on page 156 first.
Outer part of the lamp
Turn the holder with the bulb
A
in the direction of the arrow
1
» Fig. 198.
Remove the holder with the bulb from the light housing in the direction of
the arrow
2
and replace the bulb.
Reinsert the holder with the bulb into the lamp housing and turn in the op-
posite direction of the arrow
1
to the stop.
Inner parts of the lamp
Unlock the bulb holder using the marked area with arrows » Fig. 198 and re-
move the bulb holder from the light.
Turn the respective light bulb counter-clockwise to the stop and remove it
from the bulb holder.
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
Insert the bulb holder in the tail lamp assembly.
160
Do-it-yourself
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda Rapid Spaceback - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Rapid Spaceback - 2016 in the language / languages: English as an attachment in your email.

The manual is 29,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda Rapid Spaceback - 2016

Skoda Rapid Spaceback - 2016 User Manual - German - 188 pages

Skoda Rapid Spaceback - 2016 User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info