678271
286
Zoom out
Zoom in
Previous page
1/328
Next page
Inflation hose with plug
Air compressor (the layout of the controls may be different depending on
the type of air compressor delivered with the vehicle)
Tyre inflation hose
Button for the tyre pressure reduction
Tyre inflation pressure indicator
12 volt cable plug
ON and OFF switch
Tyre inflation bottle with sealing agent
Replacement valve insert
Note
The declaration of conformity is included with the air compressor or the log
folder.
Preparing to use the puncture repair kit
Read and observe on page 283 first.
For safety's sake, the following instructions must be observed before
performing a wheel repair the road.
As far as possible, park the vehicle far away from the traffic flow - find a
place with a flat and firm surface.
Switch off the engine.
For vehicles with manual transmission, select 1st gear.
For vehicles with automatic transmission, place the selector lever in the P
position.
Switch on the parking brake.
Position the hazard warning system and the warning triangle at the prescri-
bed distance.
All the occupants should get out of the vehicle. The passengers should not
stand on the road (instead they should remain behind a crash barrier, for in-
stance) while the wheel is being repaired.
Uncouple any trailers.
3
4
5
6
7
8
9
10
11
Sealing and inflating tyres
Read and observe on page 283 first.
Sealing
Unscrew the valve cap from the damaged tyre.
Insert the valve remover
2
» Fig. 325 on page 283 on the valve insert, so
that the valve insert fits into the slot of the valve remover.
Unscrew the valve insert and lay it on a clean surface (e.g. cloth, paper etc.).
Forcefully shake bottle
10
several times.
Firmly screw the inflation hose
3
onto the tyre inflater bottle
10
. The film
on the cap is pierced automatically.
Remove the plug from the inflation hose
3
and plug the open end fully onto
the tyre valve.
Hold the bottle
10
with the bottom facing upwards and fill all of the sealing
agent from the tyre inflator bottle into the tyre.
Remove the filler plug from the tyre valve.
Screw in the valve insert using the valve remover
2
.
Inflating
Screw the air compressor tyre inflation hose
5
» Fig. 325 on page 283 firmly
onto the tyre valve.
For vehicles with manual transmission, set the lever in the neutral position.
On vehicles with automatic transmission, place the selector lever in the P
position.
Start the engine.
Plug the connector
8
into 12 volt socket » page 102.
Switch on the air compressor with the ON and OFF switch
9
.
Once a tyre inflation pressure of 2.0-2.5 bar is reached, turn off the air com-
pressor. Observe the maximum running time of the air compressor according
to the instructions of the repair kit manufacturer » .
If you cannot reach an air pressure of 2.0 - 2.5 bar, unscrew the tyre inflation
hose
5
from the tyre valve.
Drive the vehicle approx. 10 metres forwards or backwards to allow the seal-
ing agent to “distribute” in the tyre.
Firmly screw the tyre inflation hose
5
back onto the tyre valve and repeat
the inflation process.
Stick the corresponding sticker
1
on the dashboard in the driver's field of
view.
284
Do-it-yourself
286


Need help? Post your question in this forum.

Forumrules
1

Forum

skoda-karoq---2018

Reset search

  • Comment changer le filtre d'habitacle sur SKODA KAROQ ESSENCE
    Submitted on 13-11-2022 at 12:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda Karoq - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Karoq - 2018 in the language / languages: English as an attachment in your email.

The manual is 55,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda Karoq - 2018

Skoda Karoq - 2018 User Manual - German - 344 pages

Skoda Karoq - 2018 User Manual - Dutch - 340 pages

Skoda Karoq - 2018 User Manual - French - 348 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info