618763
13
Zoom out
Zoom in
Previous page
1/232
Next page
Instruments and Indicator/Warning Lights12
Service Interval Display
A key symbol page 11, fig. 5 appears in the counter display for distance driven
about 30 days before reaching the due date for the service. The remaining distance
to be driven will be indicated for 10 seconds next to the key symbol and then the
remaining number of days to the due date for the service inspection.
The following will be displayed in the information display*:
SERVICE DUE IN ... KM OR ... DAYS
The kilometre indicator or the days indicator reduces in steps of 100 km. or days
until the service due date is reached.
The text INSP appears as a flashing key symbol and as soon as the due date for the
service is reached.
The following will be displayed in the information display*:
SERVICE NOW
The display disappears within 20 seconds after switching on the ignition. The trip
counter is also displayed after pressing the reset button of the trip counter for
distance driven (for more than 1 second).
Resetting Service Interval Display
We recommend having this resetting performed by a specialist garage.
The specialist garage:
resets the memory of the display after the appropriate inspection,
makes an entry in the Service schedule,
affix the sticker with the entry of the following service interval to the side of the
dash panel on the driver's side.
It is also possible for you to reset the Service Interval Display with the reset button
page 11, fig. 4 as follows:
Press the reset button page 11, fig. 4 with the ignition switched off and
and hold it down.
Switch the ignition on, release the reset button and and turn the reset button
to the right. All counters will be reset to 0.
It is only possible to reset the Service Interval Display, if a service message or at least
a pre-warning is shown on the display of the instrument cluster.
Caution
We recommend that you do not reset the Service Interval Display yourself other-
wise this can result in the service interval display being incorrectly set, which may
also result in problems with operation of your vehicle.
Note
Never reset the display between service intervals otherwise this may result in
incorrect readouts.
information is retained in the Service Interval Display also after the battery of
the vehicle is disconnected.
it is necessary to re-code the Service Interval Display if a new instrument cluster
is installed during repair work. This work is carried out by a specialist garage.
Please refer to the brochure Service schedule for extensive information about
the service intervals.
Digital clock
A reset button is installed on the left below beside the speedometer for
adjusting the clock page 9, fig. 2.
Set hours
Turn the reset button to the left.
Setting minutes
Turn the reset button to the right.
A
A
A
A
A
A
NKO
A04
20
.
book
Page
12
Friday
,
March
2
,
2007
2:18
PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda Fabia 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Fabia 2007 in the language / languages: English as an attachment in your email.

The manual is 12,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info