678226
129
Zoom out
Zoom in
Previous page
1/160
Next page
Air compressor (the layout of the controls may be different depending on
the type of air compressor delivered with the vehicle)
Tyre inflation hose
Button for tyre pressure reduction
Tyre inflation pressure indicator
12 volt cable connector
ON and OFF switch
Tyre inflator bottle with sealing agent
Replacement valve core
Note
The declaration of conformity is included with the air compressor or the log
folder.
Preparing to use the breakdown kit
Read and observe on page 126 first.
For safety's sake, the following instructions must be observed before
undertaking a wheel repair on a road.
Park the vehicle as far as possible away from the traffic flow - choose a place
with a flat and firm surface.
Switch off the engine.
For vehicles with manual transmission select 1st gear.
For vehicles with automated transmission shift the lever to position D or R.
Firmly apply the handbrake.
Switch on the hazard warning lights and set up the warning triangle at the
prescribed distance.
Have all the occupants get out. While the repair is being carried out, the
passengers should not stand on the road (instead they should remain behind
a crash barrier, for instance).
Sealing and inflating tyres
Read and observe on page 126 first.
Sealing
Unscrew the valve cap from the damaged tyre.
Insert the valve remover
2
» Fig. 156 on page 126 on the valve insert, so that
the valve insert fits into the slot of the valve remover.
4
5
6
7
8
9
10
11
Unscrew the valve insert and place it on a clean base (rag, paper etc.).
Forcefully shake bottle
10
several times.
Firmly screw the inflation hose
3
onto the tyre inflater bottle
10
. The film
on the bottle cap is pierced.
Remove the plug from the inflation hose
3
and insert the bottle onto the
tyre valve.
Hold the bottle
10
with the bottom facing upwards and fill all of the sealing
agent from the tyre inflator bottle into the tyre.
Remove the filler plug from the tyre valve.
Screw in the valve insert with the valve remover
2
.
Inflating
Screw the air compressor tyre inflation hose
5
» Fig. 156 on page 126 firmly
onto the tyre valve.
For vehicles with manual transmission set the gearshift lever to the neutral
position.
For vehicles with automated manual transmission shift the lever to position
N.
Start the engine.
Plug the connector
8
into the 12 volt socket » page 56, 12-volt socket.
Switch on the air compressor with the ON and OFF switch
9
.
Once tyre inflation pressure of 2.0-2.5 bar has been reached, turn off the air
compressor. Observe the maximum running time of the air compressor ac-
cording to the instructions of the repair kit manufacturer » .
If an air pressure of 2.0 - 2.5 bar has not been reached, unscrew the tyre in-
flation hose
5
from the tyre valve.
Drive the vehicle 10 metres forwards or backwards to allow the sealing
agent to “distribute” in the tyre.
Firmly screw the tyre inflation hose
5
back onto the tyre valve and repeat
the inflation process.
Stick the sticker
1
» Fig. 156 on page 126 on the dash panel in the driver's
field of view.
At a tyre inflation pressure of 2.0 – 2.5 bar, the journey can be continued at a
maximum speed of 80 km/h or 50 mph.
127
Emergency equipment and self-help
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda Citigo - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Citigo - 2017 in the language / languages: English as an attachment in your email.

The manual is 25,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda Citigo - 2017

Skoda Citigo - 2017 User Manual - German - 168 pages

Skoda Citigo - 2017 User Manual - Dutch - 168 pages

Skoda Citigo - 2017 User Manual - French - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info