678545
10
Zoom out
Zoom in
Previous page
1/24
Next page
Traffic station set-ups
Call up the TIM setup menu by pressing
SETUP
and the
Traffic information
function
button.
Tap on the left of the display of a TIM recording time to open the Setup of re-
cording times menu .
In theSetup of recording times menu tap briefly on the arrow keys
or
on
the screen below the hours and minutes display to increase/decrease the re-
spective unit of time.
Hold down the appropriate arrow button to change the time unit continuously.
Release the button when the desired value is reached.
Tap
to select the displayed TIM recording time and to exit the Setup of re-
cording times menu.
Both desired TIM recording times can now be set.
Activate or deactivate the desired TIM recording time by pressing the
On
func-
tion button. If the check-box is active
the accompanying TIM recording time is
activated.
The unit starts with the recording 90 minutes before the set start time and ends
the recording 30 minutes afterwards.
Setup Media
Call up the Setup media menu by pressing the
SETUP
selector button and the
Media
function button.
Function keys in the menu - Setup Media
Activate AUX input
- for playback of an external audio source.
BT Audio Autoplay
- enables wireless transfer of MP3 files in the phone kit.
Hide artist/track name
- according to the set-ups the title and performer name or on-
ly the data and folder name will be displayed for audio CDs with CD texts and in
the MP3 operation.
Scan/Mix/Repeat including subfolders
- plays all MP3 data one after the other according
to the sequence on the played medium, which are stored in the folders and sub-
folders.
AUX volume
- sensitivity of the AUX-IN input for adjusting the playback volume of a
connected external audio source can be adjusted in three levels to the other au-
dio sources. Tap the
AUX input level
function button and select the desired input
sensitivity in the opened pop-up window. If a MEDIA-IN multimedia input is also
installed, this setting also applies to the audio sources that are connected to this
input.
Setup system
Call up the Setup system menu by pressing the
SETUP
selector button and the
System
function button.
Change the system language manually
Tap on the
Language
function button and select the desired language in the
opened pop-up window. The system language is normally predetermined“ auto-
matically” by the language setting of the information display. If desired, another
language can be selected for the radio as described.
Reset the factory settings on the unit
Tap on the
Factory settings
function button.
After confirming the following security question, the device will be reset to fac-
tory settings and all data will be lost.
Illumination of the control buttons
Tap on the
Illumination
function button.
With the ignition on, you can switch the illumination of the control buttons
1
and
2
on
2
or off
1
.
Display setting for the Climatronic unit
Tap on the
Climate displays
function button.
This can switch the display of the Climatronic values on or off.
Telephone set-ups
Call up the Setup phonemenu by pressing the
SETUP
selector button and the
Telephone
function button.
Updating telephone book in the unit
Tap the function button
Update phonebook
to update in the device all changed
entries since the last connection to the phone book of the mobile phone or the
SIM card. This procedure can take a few minutes.
Confirm the following security prompt. The “old” data in the telephone book can
still be selected at the unit while the data is being updated.
In this context, note the applicable operating instructions for your vehicle.
8
Device setup
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Skoda Bolero - 2013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Skoda Bolero - 2013 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Skoda Bolero - 2013

Skoda Bolero - 2013 User Manual - German - 26 pages

Skoda Bolero - 2013 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info